저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two black square thermal pads 100 by 100 by 1.5 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 2-pack thermal pad 100x100x1.5mm

SKU CH-29KY-3064R

Two 100 x 100 mm pads, 1.5 mm thick, non-conductive thermal interface for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Good thermal conductivity for efficient heat transfer
  • Electrically non-conductive design prevents short circuits
  • 100 x 100 mm size fits SSDs and GPU coolers
  • 5 mm thickness fills gaps on memory and VRM
  • Two-pack provides spare pads for multiple components

Thermal pad for SSDs and GPUs

Thermal Grizzly Minus Pad Basic pads provide a non-conductive thermal interface for solid-state drives, graphics card coolers and other board-level components. The 100 x 100 mm sheets can be cut to match the exact area of each chip or module. Two pads are included in the pack for multiple installation points.

Thermals and handling

The pads deliver good thermal conductivity to move heat away from memory modules and voltage regulators under normal loads. Being electrically non-conductive eliminates the risk of short circuits if material bridges adjacent contacts. Lower compressibility compared to higher-tier variants means the pads retain shape during repeated mounting cycles.

Build integration

Each 1.5 mm thick sheet fits standard gap heights found on many SSD and GPU cooler designs without additional shimming. The material is ready to use straight from the package and requires no curing time or special tools. Users needing higher compressibility or maximum conductivity may prefer the Advance or Pro series instead.

주요 특징

  • Good thermal conductivity for efficient heat transfer
  • Electrically non-conductive design prevents short circuits
  • 100 x 100 mm size fits SSDs and GPU coolers
  • 5 mm thickness fills gaps on memory and VRM
  • Two-pack provides spare pads for multiple components

사양

BrandThermal Grizzly
ModelTG-MP-B-100-100-15-2
Part NumberTG-MP-B-100-100-15-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

이 상품에 대한 질문

How do I install the 1.5 mm thick pad on an SSD or GPU cooler, and what step is often missed?

Cut the 100 x 100 mm sheet to size, peel both protective films, place the pad on the clean component, then mount the heatsink with even pressure so the 1.5 mm gap fills without air pockets.

When will the Minus Pad Basic need replacement in a GPU or SSD application?

The electrically non-conductive silicone compound does not dry out; plan to replace it only when you disassemble the cooler or if the pad is torn during a future upgrade.

What thermal limit appears first during sustained heavy loads on a graphics card or SSD?

The pad’s good thermal conductivity and slightly lower compressibility mean the component’s own thermal throttle point will be reached before the pad saturates.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.