Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small green circuit board with yellow pin headers and USB cable

Wonrabai Pico 2 W RP2350 Development Board with Pre-Soldered Header

SKU CH-RH74-8P1CT

IoT development board with RP2350 dual-core processor, 2.4 GHz Wi-Fi, Bluetooth 5.2, 520 KB SRAM, 4 MB Flash, and pre-soldered header

  • TypePico 2 W
  • MotherboardPico 2 W
  • CPURP2350, Arm Cortex-M33, Hazard3 RISC-V
  • MemorySRAM
  • CPU Socket TypeM
  • CPU TypeARM Cortex
  • Pre-soldered header saves assembly time with ready-to-use GPIO access
  • Dual-core Arm Cortex-M33 and Hazard3 RISC-V at 150 MHz handles parallel tasks efficiently
  • 4 GHz 802.11n Wi-Fi and Bluetooth 5.2 enable wireless IoT connectivity
  • 26 multi-function GPIO plus 12 PIO state machines support custom peripherals
  • 520 KB SRAM and 4 MB Flash store firmware and data locally

Target Audience

The Wonrabai Pico 2 W is a microcontroller development board built around the RP2350 chip. It suits makers and engineers who need integrated 2.4 GHz 802.11n Wi-Fi and Bluetooth 5.2 for wireless IoT prototypes. The board ships with a yellow pre-soldered header and a USB cable, so it is ready for immediate breadboard experimentation.

Memory and Performance

The RP2350 provides a dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V architecture clocked up to 150 MHz. On-board resources include 520 KB of SRAM and 4 MB of Flash memory. The 26 multi-function GPIO pins support 2 SPI, 2 I2C, 2 UART, 3 ADC channels and 16 PWM outputs, while 12 programmable I/O state machines handle custom peripheral timing.

Upgrade Context

This board replaces the earlier Pico 2 by adding the Infineon CYW43439 wireless chip and onboard antenna. The jump is worthwhile when a project requires cable-free connectivity or Bluetooth 5.2 peripherals. It is not a fit for applications that need high-speed wired networking, large external memory pools or PCI Express expansion.

Přednosti

  • Pre-soldered header saves assembly time with ready-to-use GPIO access
  • Dual-core Arm Cortex-M33 and Hazard3 RISC-V at 150 MHz handles parallel tasks efficiently
  • 4 GHz 802.11n Wi-Fi and Bluetooth 5.2 enable wireless IoT connectivity
  • 26 multi-function GPIO plus 12 PIO state machines support custom peripherals
  • 520 KB SRAM and 4 MB Flash store firmware and data locally

Specifikace

BrandWonrabai
ModelPico 2 W
TypePico 2 W
MotherboardPico 2 W
CPURP2350, Arm Cortex-M33, Hazard3 RISC-V
MemorySRAM
CPU Socket TypeM
CPU TypeARM Cortex
North BridgeRP2350
South BridgeRP2350
Number of Memory Slots2x288pin (DDR4) + 2x240pin
Memory StandardSRAM
Maximum Memory Supported512MB
PCI Express x160
PCI Express x40
PCI Express x10
PCI Slots0
Mini Card Slots0
Other Slots0
SATA1 x SATA 3.0Gb/s
SATA RAIDNV RAID 0/1/0+1 JBOD
Additional SATA1 x SATA 3.0Gb/s
Additional SATA RAID0/1
Onboard Video ChipsetRP2350
Max LAN Speed100Mbps
Wireless LANBased on Official RP2350 Chip, Dual-core & Dual-architecture Design, Supports W-I-F--I and Blue--too--th, 2ABCB-PICO2W
BluetoothBased on Official RP2350 Chip, Dual-core & Dual-architecture Design, Supports W-I-F--I and Blue--too--th
PS/22
COM2
Video Ports0
HDMI0
USB 1.1/2.04 x USB 3.0 + 10 x USB 2.0
USB 3.01 x USB 3.0
eSATA1 x eSATA 6.0Gb/s
Audio Ports2 Ports
Onboard USB1 x USB 3.0
Other ConnectorsUSB
FeaturesRP2350, SRAM, 1, 0, USB, Carrier Boards, Computers (PCs, laptops, tablets), Microcontrollers, Sensors, Displays, Peripherals
Dimensions (W x L)3.2 cm x 6.4 cm x 10.2 cm
Package ContentsPico 2 W x 1

Otázky k tomuto produktu

Will the 26 GPIO pins on this Pico 2 W board align with my existing Raspberry Pi Pico HATs?

Yes, the 26 multi-function GPIO pins keep the standard Pico pinout so your current HATs and expansion boards will connect without adapters.

How can I confirm the RP2350 dual-core processor and wireless module are functioning after I plug it in?

The board appears as a USB mass-storage device; drag a MicroPython UF2 file onto it, then run a script that prints the CPU frequency and scans for Wi-Fi networks to verify both cores and the CYW43439 radio.

Does the kit include the yellow pre-soldered header and a USB cable, or must I source them separately?

The yellow header is already soldered to the castellated pads and a USB cable is supplied in the box, so no extra parts are required to start developing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.