BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276771BTC
Auf Lager
A-Tech
A-Tech 4GB DDR3 1600MHz CL11 1.5V HP 655410-D88 717046-001 688600-001 2Rx8 Desktop RAM
A 4 GB DDR3 DIMM running at 1600 MHz with CL11 latency and 1.5 V for HP desktops using part numbers 655410-D88, 717046-001 or 688600-001
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- Boosts multitasking with 4GB DDR3 1600MHz CL11
- Runs at standard 1.5V DDR3 voltage for stability
- 240-pin DIMM fits compatible HP desktop slots
- Non-ECC unbuffered design for standard desktop use
- Replaces HP part numbers 655410-D88 717046-001 688600-001
HP-Compatible 4GB DDR3 Module
This 4GB DDR3 module is a direct replacement for HP part numbers 655410-D88, 717046-001 and 688600-001. It operates at 1600MHz with a CL11 latency and standard 1.5V voltage. The unbuffered, non-ECC DIMM uses a 240-pin interface and a 2Rx8 chip organisation. It is built for desktop systems that require these exact HP specifications.
Suitable for HP Desktop Upgrades
This module suits owners of compatible HP desktops needing a 4GB DDR3 upgrade to match the original factory specification. Systems that require ECC memory, registered DIMMs, a different voltage, or a higher density per slot should look at alternative modules. Compatibility depends on the motherboard accepting 2Rx8 unbuffered DDR3 at 1.5V.
2Rx8 Organisation Decides Fit
The 2Rx8 chip organisation is the critical specification that determines whether this module will work in a given HP desktop. Some HP platforms only accept 1Rx8 or 1Rx16 configurations and will not post with a 2Rx8 stick. Verify the original module label or the system service manual for the rank and organisation details before purchasing.
Besonderheiten
- Boosts multitasking with 4GB DDR3 1600MHz CL11
- Runs at standard 1.5V DDR3 voltage for stability
- 240-pin DIMM fits compatible HP desktop slots
- Non-ECC unbuffered design for standard desktop use
- Replaces HP part numbers 655410-D88 717046-001 688600-001
Technische Daten
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 655410-D88, 717046-001, 688600-001 |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | 655410-D88, 717046-001, 688600-001 |
| Recommend Use | Compatible Replacement for HP 655410-D88, 717046-001, 688600-001 |
Fragen zu diesem Artikel
What does the DDR3 1600 PC3-12800 rating mean for real-world throughput?
The module runs at 1600 MHz with a peak transfer rate of 12800 MB/s; actual bandwidth depends on the motherboard's memory controller and whether it operates in single- or dual-channel mode.
Will this 240-pin DIMM fit the memory slots on my HP desktop?
The stick uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop board that accepts unbuffered non-ECC DDR3 DIMMs; verify your model's maximum capacity per slot before installing.
How do I install the module and what is the common mistake to avoid?
Power off the PC, open the case, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then power on; the frequent error is stopping before the clips latch, leaving the module partially seated.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
