Alphacool
Alphacool 17387 HF G1/4" 10/13mm Compression Fitting Deep Black 6-pack
Connects 10/13 mm soft tubing to G1/4" threads in a six-pack of brass Deep Black fittings
- FeaturesThis connector can be used to connect 13/10mm tubing with a
- High-flow 10 mm ID path for unrestricted coolant movement
- G1/4" thread fits 95 % of water-cooling components
- Brass body with Deep Black chromatised finish resists peeling
- Compression design seals 13 mm OD soft tubing securely
- Six-pack supplies enough fittings for a typical loop
Six-pack of G1/4" compression fittings
This Alphacool six-pack supplies six straight compression fittings for custom water-cooling loops. Each fitting accepts soft tubing with a 10 mm inner diameter and 13 mm outer diameter and mates to a standard G1/4" thread. The brass bodies are finished in Deep Black using a chromatising process that bonds the colour to the metal for lasting appearance.
Replacing mismatched or single fittings
Buyers upgrading from assorted individual fittings gain a uniform look and consistent flow path across the loop. The six-pack is worth it when a build needs multiple identical connections, such as linking several radiators, blocks and a reservoir, and when the 95 % component compatibility covers the existing hardware.
High-flow bore for 10/13 mm tubing
The enlarged inner bore keeps restriction low for pumps driving multiple blocks and radiators. Headroom is set by the G1/4" thread standard and the 10 mm ID tubing size; the fittings do not support hard tubing, larger bore sizes or non-G1/4" ports.
Besonderheiten
- High-flow 10 mm ID path for unrestricted coolant movement
- G1/4" thread fits 95 % of water-cooling components
- Brass body with Deep Black chromatised finish resists peeling
- Compression design seals 13 mm OD soft tubing securely
- Six-pack supplies enough fittings for a typical loop
Technische Daten
| Brand | Alphacool |
|---|---|
| Model | 17387 |
| Features | This connector can be used to connect 13/10mm tubing with a 1/4“ thread. |
| Part Number | 1012846 |
Fragen zu diesem Artikel
What tubing inner and outer diameters does the G1/4" compression fitting accept?
The fitting is designed for soft tubing with a 10 mm inner diameter and 13 mm outer diameter.
How do you install the compression fitting onto the component and tubing, and what step is often missed?
Thread the G1/4" end into the component port by hand, then slide the compression ring and nut over the tubing, push the tubing fully onto the barb, and tighten the nut — the step often missed is ensuring the tubing is fully seated before tightening.
When should the compression rings or O-rings be inspected or replaced?
Inspect the sealing rings whenever the loop is drained or if any seepage appears at the fitting; replace them if they show cracking, flattening, or loss of elasticity.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Auf Lager