저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Six brass G1/4" compression fittings in deep black for 10/13mm tubing

Alphacool

Alphacool 17387 HF G1/4" 10/13mm Compression Fitting Deep Black 6-pack

SKU CH-XX2S-AK328

Connects 10/13 mm soft tubing to G1/4" threads in a six-pack of brass Deep Black fittings

  • FeaturesThis connector can be used to connect 13/10mm tubing with a
  • High-flow 10 mm ID path for unrestricted coolant movement
  • G1/4" thread fits 95 % of water-cooling components
  • Brass body with Deep Black chromatised finish resists peeling
  • Compression design seals 13 mm OD soft tubing securely
  • Six-pack supplies enough fittings for a typical loop

Six-pack of G1/4" compression fittings

This Alphacool six-pack supplies six straight compression fittings for custom water-cooling loops. Each fitting accepts soft tubing with a 10 mm inner diameter and 13 mm outer diameter and mates to a standard G1/4" thread. The brass bodies are finished in Deep Black using a chromatising process that bonds the colour to the metal for lasting appearance.

Replacing mismatched or single fittings

Buyers upgrading from assorted individual fittings gain a uniform look and consistent flow path across the loop. The six-pack is worth it when a build needs multiple identical connections, such as linking several radiators, blocks and a reservoir, and when the 95 % component compatibility covers the existing hardware.

High-flow bore for 10/13 mm tubing

The enlarged inner bore keeps restriction low for pumps driving multiple blocks and radiators. Headroom is set by the G1/4" thread standard and the 10 mm ID tubing size; the fittings do not support hard tubing, larger bore sizes or non-G1/4" ports.

주요 특징

  • High-flow 10 mm ID path for unrestricted coolant movement
  • G1/4" thread fits 95 % of water-cooling components
  • Brass body with Deep Black chromatised finish resists peeling
  • Compression design seals 13 mm OD soft tubing securely
  • Six-pack supplies enough fittings for a typical loop

사양

BrandAlphacool
Model17387
FeaturesThis connector can be used to connect 13/10mm tubing with a 1/4“ thread.
Part Number1012846

이 상품에 대한 질문

What tubing inner and outer diameters does the G1/4" compression fitting accept?

The fitting is designed for soft tubing with a 10 mm inner diameter and 13 mm outer diameter.

How do you install the compression fitting onto the component and tubing, and what step is often missed?

Thread the G1/4" end into the component port by hand, then slide the compression ring and nut over the tubing, push the tubing fully onto the barb, and tighten the nut — the step often missed is ensuring the tubing is fully seated before tightening.

When should the compression rings or O-rings be inspected or replaced?

Inspect the sealing rings whenever the loop is drained or if any seepage appears at the fitting; replace them if they show cracking, flattening, or loss of elasticity.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.