Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.

Gemerkte Artikel Anmelden
Green rectangular circuit board with black memory chips and gold edge connectors

Brute Networks

Brute Networks 8GB DDR4-2133 ECC SODIMM 2Rx8 CL15 1.20V T0H92AA-BN

SKU CH-MGJV-C3VVQ

An 8 GB DDR4 SODIMM with ECC, 2133 MT/s speed and CL15 latency for HP-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data errors in critical workloads
  • 2133 MHz DDR4 speed matches server platform requirements
  • 20 V operation reduces power draw per module
  • 2Rx8 dual-rank layout increases memory density per slot
  • HP T0H92AA equivalent ensures drop-in compatibility

HP-compatible server SODIMM for DDR4 systems

This 8 GB DDR4-2133 module is built for HP servers and workstations that require ECC memory. It carries the T0H92AA part number equivalent and uses major-brand chips from Samsung, SK Hynix or Micron. The unregistered 2Rx8 design fits standard DDR4 SODIMM slots in compatible platforms. Buyers who need registered DIMMs or a different form factor cannot use this module.

Low-voltage operation at 1.20 V with CL15 timing

The module runs at the standard DDR4 voltage of 1.20 V and is rated at CAS latency 15. ECC circuitry corrects single-bit errors without adding measurable latency in normal workloads. Power draw stays within the DDR4 SODIMM specification for this speed grade. Systems that require a different voltage or latency profile will not match these specifications.

288-pin SODIMM with lifetime validation

Each stick uses a 288-pin edge connector and is tested for full HP compatibility before shipping. Modules from the same order are guaranteed to match, preventing mixed-rank or mixed-vendor issues. The major-brand chipset ensures consistent quality across the batch. Builds that need a DIMM form factor or a non-ECC configuration must choose a different product.

Besonderheiten

  • ECC protection prevents data errors in critical workloads
  • 2133 MHz DDR4 speed matches server platform requirements
  • 20 V operation reduces power draw per module
  • 2Rx8 dual-rank layout increases memory density per slot
  • HP T0H92AA equivalent ensures drop-in compatibility

Technische Daten

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Fragen zu diesem Artikel

How do I install the 288-Pin DDR4 SODIMM and what step do people get wrong?

Align the notch on the module with the key in the slot, press firmly until both side clips click, and verify the system recognises the full 8GB at 2133 MHz. The common mistake is stopping before the clips engage, leaving the module partially seated.

What maintenance or replacement will the 2Rx8 ECC module need later?

No scheduled maintenance is required; the module is rated for continuous server operation at 1.20 V. Replace it only if memory diagnostics report correctable ECC errors that exceed the platform threshold.

What limit appears first under sustained load with CL15 DDR4-2133?

The CAS latency of 15 cycles at 2133 MHz sets the baseline response time; under sustained write-heavy workloads the memory controller will hit this timing ceiling before thermal or voltage limits become a factor.

Ebenfalls in dieser Kategorie

Kunden haben diese ebenfalls verglichen

Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.