我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with black memory chips and gold edge connectors

Brute Networks

Brute Networks 8GB DDR4-2133 ECC SODIMM 2Rx8 CL15 1.20V T0H92AA-BN

SKU CH-MGJV-C3VVQ

An 8 GB DDR4 SODIMM with ECC, 2133 MT/s speed and CL15 latency for HP-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data errors in critical workloads
  • 2133 MHz DDR4 speed matches server platform requirements
  • 20 V operation reduces power draw per module
  • 2Rx8 dual-rank layout increases memory density per slot
  • HP T0H92AA equivalent ensures drop-in compatibility

HP-compatible server SODIMM for DDR4 systems

This 8 GB DDR4-2133 module is built for HP servers and workstations that require ECC memory. It carries the T0H92AA part number equivalent and uses major-brand chips from Samsung, SK Hynix or Micron. The unregistered 2Rx8 design fits standard DDR4 SODIMM slots in compatible platforms. Buyers who need registered DIMMs or a different form factor cannot use this module.

Low-voltage operation at 1.20 V with CL15 timing

The module runs at the standard DDR4 voltage of 1.20 V and is rated at CAS latency 15. ECC circuitry corrects single-bit errors without adding measurable latency in normal workloads. Power draw stays within the DDR4 SODIMM specification for this speed grade. Systems that require a different voltage or latency profile will not match these specifications.

288-pin SODIMM with lifetime validation

Each stick uses a 288-pin edge connector and is tested for full HP compatibility before shipping. Modules from the same order are guaranteed to match, preventing mixed-rank or mixed-vendor issues. The major-brand chipset ensures consistent quality across the batch. Builds that need a DIMM form factor or a non-ECC configuration must choose a different product.

商品特色

  • ECC protection prevents data errors in critical workloads
  • 2133 MHz DDR4 speed matches server platform requirements
  • 20 V operation reduces power draw per module
  • 2Rx8 dual-rank layout increases memory density per slot
  • HP T0H92AA equivalent ensures drop-in compatibility

商品規格

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

商品問答

How do I install the 288-Pin DDR4 SODIMM and what step do people get wrong?

Align the notch on the module with the key in the slot, press firmly until both side clips click, and verify the system recognises the full 8GB at 2133 MHz. The common mistake is stopping before the clips engage, leaving the module partially seated.

What maintenance or replacement will the 2Rx8 ECC module need later?

No scheduled maintenance is required; the module is rated for continuous server operation at 1.20 V. Replace it only if memory diagnostics report correctable ECC errors that exceed the platform threshold.

What limit appears first under sustained load with CL15 DDR4-2133?

The CAS latency of 15 cycles at 2133 MHz sets the baseline response time; under sustained write-heavy workloads the memory controller will hit this timing ceiling before thermal or voltage limits become a factor.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。