LORDWORLD LX-824HV 17KG 11.1V Bus Servo 240°/360°

High-torque bus servo for robotics projects

The LORDWORLD LX-824HV delivers 17 kg of torque at 11.1 V, making it suited for demanding joint actuation in humanoid robots or heavy-duty manipulators. It operates in two distinct modes: a servo mode limited to 240° and a continuous gear-motor mode covering 360°. Builders who need absolute position feedback for closed-loop control will benefit from the internal high-precision potentiometer. This unit is not for lightweight hobby arms that run on standard 5 V or 6 V supplies.

Daisy-chain wiring with three bus connectors

Three serial bus connectors allow multiple servos to be linked in a chain, reducing cable clutter inside a robot frame. The high-voltage design lowers current draw, which extends operating time on a single battery pack. An internal potentiometer provides real-time angle, temperature and voltage data back to the controller. Users who require PWM-only interfaces or single-cable hookups will find the bus architecture incompatible with their existing electronics.

Check voltage, protocol

Verify that your control board speaks the same serial bus protocol and can supply a stable 11.1 V rail under load. Confirm that 240° of travel in servo mode meets the range-of-motion requirement for your joint design. Ensure the mounting pattern and output shaft match the brackets or horns already in your build. Teams using 5 V or 6 V servo buses cannot power this unit without a dedicated regulator.