Micron
Micron MTFDDAK1T9TGA-1BC1ZA 5400 PRO 1.92TB 2.5" SATA enterprise SSD
Enterprise 2.5" SATA SSD storing 1.92 TB for always-on server workloads
- Device TypeComputer Accessories
- Used ForConsumer
- Form Factor2.5"
- Capacity1.92TB
- InterfaceSATA III
- ProtocolSATA
- 92 TB capacity for large enterprise workloads
- SATA 6 Gb/s interface for broad server compatibility
- 5 inch 7 mm form factor fits standard drive bays
- 1764 kg lightweight design eases rack installation
- Micron 5400 PRO series built for mixed-use endurance
1.92 TB SATA Enterprise SSD
The Micron 5400 PRO is a 2.5 inch internal solid-state drive with a 1.92 TB capacity and a SATA 6 Gb/s interface. It is built for server and storage arrays that need consistent read performance in a 7 mm height form factor. The drive is supplied new and uses non-SED flash memory.
Suited for read-heavy server workloads
This drive fits administrators who want a SATA SSD for boot, logging or content-delivery roles where write endurance is secondary. Buyers who need hardware-based encryption or a self-encrypting drive should look at a different model. Systems limited to SATA II ports will not reach the drive's rated throughput.
SATA III interface and 7 mm height
The single specification that decides compatibility is the SATA III interface combined with the 7 mm (0.800) z-height. A bay or backplane must accept a 2.5 inch SATA device at that thickness, otherwise the drive will not install or operate.
Besonderheiten
- 92 TB capacity for large enterprise workloads
- SATA 6 Gb/s interface for broad server compatibility
- 5 inch 7 mm form factor fits standard drive bays
- 1764 kg lightweight design eases rack installation
- Micron 5400 PRO series built for mixed-use endurance
Technische Daten
| Brand | Micron |
|---|---|
| Model | MTFDDAK1T9TGA-1BC1ZABYYR |
| Device Type | Computer Accessories |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1.92TB |
| Interface | SATA III |
| Protocol | SATA |
| Height | 0.800 |
| Width | 5.200 |
| Weight | 0.1764 |
| Versandgewicht | 0.23 kg |
| Paketgröße | 229 × 102 × 51 mm |
Fragen zu diesem Artikel
How do I install this 2.5" SATA SSD and what step is often missed?
Mount the 7 mm drive in a 2.5" bay using the four side screws, connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise the 1.92 TB volume in the OS disk manager — skipping initialisation leaves the drive invisible.
What maintenance or replacement will this Micron 5400 PRO need over time?
Enterprise SSDs have no moving parts to service; monitor SMART attributes for media wear and replace the drive once the endurance rating for the 1920 GB capacity is reached.
Which limit appears first during sustained writes on this SATA III drive?
The SATA 6 Gb/s interface bandwidth becomes the bottleneck before the internal NAND reaches its peak throughput during long sequential writes.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
