We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 2.5 inch silver metal drive with label

Micron

Micron MTFDDAK1T9TGA-1BC1ZA 5400 PRO 1.92TB 2.5" SATA enterprise SSD

SKU CH-HCKT-TTNNC MPN MTFDDAK1T9TGA-1BC1ZA

Enterprise 2.5" SATA SSD storing 1.92 TB for always-on server workloads

  • Device TypeComputer Accessories
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity1.92TB
  • InterfaceSATA III
  • ProtocolSATA
  • 92 TB capacity for large enterprise workloads
  • SATA 6 Gb/s interface for broad server compatibility
  • 5 inch 7 mm form factor fits standard drive bays
  • 1764 kg lightweight design eases rack installation
  • Micron 5400 PRO series built for mixed-use endurance

1.92 TB SATA Enterprise SSD

The Micron 5400 PRO is a 2.5 inch internal solid-state drive with a 1.92 TB capacity and a SATA 6 Gb/s interface. It is built for server and storage arrays that need consistent read performance in a 7 mm height form factor. The drive is supplied new and uses non-SED flash memory.

Suited for read-heavy server workloads

This drive fits administrators who want a SATA SSD for boot, logging or content-delivery roles where write endurance is secondary. Buyers who need hardware-based encryption or a self-encrypting drive should look at a different model. Systems limited to SATA II ports will not reach the drive's rated throughput.

SATA III interface and 7 mm height

The single specification that decides compatibility is the SATA III interface combined with the 7 mm (0.800) z-height. A bay or backplane must accept a 2.5 inch SATA device at that thickness, otherwise the drive will not install or operate.

Highlights

  • 92 TB capacity for large enterprise workloads
  • SATA 6 Gb/s interface for broad server compatibility
  • 5 inch 7 mm form factor fits standard drive bays
  • 1764 kg lightweight design eases rack installation
  • Micron 5400 PRO series built for mixed-use endurance

Specifications

BrandMicron
ModelMTFDDAK1T9TGA-1BC1ZABYYR
Device TypeComputer Accessories
Used ForConsumer
Form Factor2.5"
Capacity1.92TB
InterfaceSATA III
ProtocolSATA
Height0.800
Width5.200
Weight0.1764
Shipping weight0.23 kg
Package size229 × 102 × 51 mm

Questions about this item

How do I install this 2.5" SATA SSD and what step is often missed?

Mount the 7 mm drive in a 2.5" bay using the four side screws, connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise the 1.92 TB volume in the OS disk manager — skipping initialisation leaves the drive invisible.

What maintenance or replacement will this Micron 5400 PRO need over time?

Enterprise SSDs have no moving parts to service; monitor SMART attributes for media wear and replace the drive once the endurance rating for the 1920 GB capacity is reached.

Which limit appears first during sustained writes on this SATA III drive?

The SATA 6 Gb/s interface bandwidth becomes the bottleneck before the internal NAND reaches its peak throughput during long sequential writes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.