NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5-6400 ECC Registered RDIMM CL52 1.1V 2Rx8 GIGABYTE MZ23-SU0 memory upgrade
- 192GB (4 x 48GB)
- 288-Pin DDR5 RDIMM
4.419,99 $
0.05680126BTC
Auf Lager
NEMIX RAM
NEMIX RAM 192GB 4x48GB DDR5 5600 CL46 ECC RDIMM GIGABYTE MZ23-SU0 memory upgrade
192 GB DDR5-5600 ECC registered RDIMM kit (4 × 48 GB, CL46, 1.1 V) validated for the Gigabyte MZ23-SU0 server board
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
Size 192GB 4X48GB
- 192 GB total capacity from four 48 GB modules for dense server workloads
- DDR5-5600 speed rated at PC5-44800 for high-throughput memory bandwidth
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- CL46 latency at 1.1 V operation matches the motherboard's memory controller spec
- Validated for GIGABYTE MZ23-SU0 with 288-pin RDIMM form factor and 2Rx8 rank
Exact-match 192GB DDR5 kit
This 192GB kit comprises four 48GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ23-SU0 motherboard expects. Each module runs at 1.1V with CL46 latency in a 2Rx8 configuration. The 288-pin registered form factor matches the board's memory-population rules for full-capacity recognition.
Registered ECC replaces unbuffered UDIMM
Registered architecture offloads the memory controller so every slot runs fully populated at rated speed while ECC corrects single-bit errors on the fly. The jump is worth it when a server workload demands maximum capacity per channel and cannot tolerate silent data corruption or unplanned reboots. Unbuffered UDIMM or non-ECC modules will not provide the same stability at this density.
Fits GIGABYTE MZ23-SU0 DDR5 slots
The kit installs directly into the motherboard's 288-pin DDR5 RDIMM slots with no heat spreader to clear. Consult the system manual for approved DIMM population order before installation. Builders needing UDIMM, SODIMM or non-ECC memory cannot use this registered kit.
Besonderheiten
- 192 GB total capacity from four 48 GB modules for dense server workloads
- DDR5-5600 speed rated at PC5-44800 for high-throughput memory bandwidth
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- CL46 latency at 1.1 V operation matches the motherboard's memory controller spec
- Validated for GIGABYTE MZ23-SU0 with 288-pin RDIMM form factor and 2Rx8 rank
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | GIGABYTE |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Andere Versionen dieses Modells
5 weitere aus dieser Serie
Gleiche Familie, unterschiedlicher Speicher, Kühler oder Takt — vergleichen Sie, bevor Sie sich entscheiden.
NEMIX RAM
NEMIX RAM 128GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM for GIGABYTE MZ73-LM0 memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
4.422,99 $
0.05683981BTC
Auf Lager
NEMIX RAM
NEMIX RAM 128GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13SST-G memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
4.427,99 $
0.05690407BTC
Auf Lager
NEMIX RAM
NEMIX RAM 128GB DDR5 6400MHz CL52 2Rx4 ECC Registered RDIMM memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
4.442,99 $
0.05709683BTC
Auf Lager
NEMIX RAM
NEMIX RAM 192GB 4x48GB DDR5 5600 CL46 ECC RDIMM Supermicro H14SSL-NT
- 192GB (4 x 48GB)
- 288-Pin DDR5 RDIMM
4.445,99 $
0.05713539BTC
Auf LagerFragen zu diesem Artikel
What motherboard slot does the 288-pin RDIMM kit require on the GIGABYTE MZ23-SU0?
The kit uses the standard 288-pin DDR5 RDIMM slot; the board must support registered ECC modules at 1.1 V to recognise all 192 GB at 5600 MT/s.
Which population order should I follow when installing the four 48 GB modules?
Install the modules in the exact DIMM sequence shown in the GIGABYTE MZ23-SU0 manual; registered ECC kits need the approved slot order to initialise at full 5600 speed.
Do the modules need any active cooling or firmware updates over their service life?
No heat spreader is fitted and no firmware updates apply; registered ECC operation at 1.1 V is maintenance-free for the lifetime of the server.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00503746BTC
Auf Lager
