Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 192GB 4x48GB DDR5 5600 CL46 ECC RDIMM GIGABYTE MZ23-SU0 memory upgrade

SKU CH-7Z8X-3NTYF

192 GB DDR5-5600 ECC registered RDIMM kit (4 × 48 GB, CL46, 1.1 V) validated for the Gigabyte MZ23-SU0 server board

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Ver 24 configuraciones más
  • 192 GB total capacity from four 48 GB modules for dense server workloads
  • DDR5-5600 speed rated at PC5-44800 for high-throughput memory bandwidth
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL46 latency at 1.1 V operation matches the motherboard's memory controller spec
  • Validated for GIGABYTE MZ23-SU0 with 288-pin RDIMM form factor and 2Rx8 rank

Exact-match 192GB DDR5 kit

This 192GB kit comprises four 48GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ23-SU0 motherboard expects. Each module runs at 1.1V with CL46 latency in a 2Rx8 configuration. The 288-pin registered form factor matches the board's memory-population rules for full-capacity recognition.

Registered ECC replaces unbuffered UDIMM

Registered architecture offloads the memory controller so every slot runs fully populated at rated speed while ECC corrects single-bit errors on the fly. The jump is worth it when a server workload demands maximum capacity per channel and cannot tolerate silent data corruption or unplanned reboots. Unbuffered UDIMM or non-ECC modules will not provide the same stability at this density.

Fits GIGABYTE MZ23-SU0 DDR5 slots

The kit installs directly into the motherboard's 288-pin DDR5 RDIMM slots with no heat spreader to clear. Consult the system manual for approved DIMM population order before installation. Builders needing UDIMM, SODIMM or non-ECC memory cannot use this registered kit.

Puntos fuertes

  • 192 GB total capacity from four 48 GB modules for dense server workloads
  • DDR5-5600 speed rated at PC5-44800 for high-throughput memory bandwidth
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL46 latency at 1.1 V operation matches the motherboard's memory controller spec
  • Validated for GIGABYTE MZ23-SU0 with 288-pin RDIMM form factor and 2Rx8 rank

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What motherboard slot does the 288-pin RDIMM kit require on the GIGABYTE MZ23-SU0?

The kit uses the standard 288-pin DDR5 RDIMM slot; the board must support registered ECC modules at 1.1 V to recognise all 192 GB at 5600 MT/s.

Which population order should I follow when installing the four 48 GB modules?

Install the modules in the exact DIMM sequence shown in the GIGABYTE MZ23-SU0 manual; registered ECC kits need the approved slot order to initialise at full 5600 speed.

Do the modules need any active cooling or firmware updates over their service life?

No heat spreader is fitted and no firmware updates apply; registered ECC operation at 1.1 V is maintenance-free for the lifetime of the server.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.