Phanteks PH-F140M25R_G2_DWT01 140mm 25mm case fan

Single 140 mm case fan with reversed blades

The Phanteks M25-140 Gen2 Reversed is a 140 mm case fan built for radiators and heatsinks where pull airflow is required. It spins from 350 to 1800 RPM, moves up to 100.07 CFM and generates 2.04 mmH2O static pressure at a maximum of 40.95 dBA. The white matte blades and frame carry DRGB lighting with an infinity mirror effect.

Replaces single-cable fans lacking daisy-chain

Builders moving from individual PWM or 3-pin fans gain a Linq6 connector that merges power and lighting into one 500 mm cable, plus a unified frame that locks multiple units together. The jump is worth it when cable routing space is tight or when a radiator stack demands reversed blade direction for optimal intake or exhaust.

Limited to Phanteks NexLinq ecosystem for full

The single Linq6 cable requires a compatible NexLinq hub or controller to address DRGB effects and fan curves through the NexLinq App. Without that hardware the fan still runs on standard 4-pin PWM, but the infinity mirror lighting and daisy-chain linking cannot be configured. No other RGB protocol or motherboard header is supported.