BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278705BTC
Auf Lager
RIMLANCE
RIMLANCE RUD14900LD8C2K8 8GB (2x4GB) DDR3 1866 CL13 1.35V Desktop RAM
An 8 GB dual-channel DDR3 kit with two 4 GB unbuffered DIMMs running at 1866 MHz, CL13 latency and 1.35 V
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- ECCNo
- Buffered/RegisteredUnbuffered
- Multi-channel KitDual Channel Kit
- 1866 MHz DDR3 speed boosts system responsiveness
- 35 V low-voltage operation reduces power draw
- Dual-channel 2 × 4 GB kit enables higher memory bandwidth
- CL13 latency supports snappy multitasking
- 240-pin UDIMM design allows straightforward desktop installation
8 GB DDR3 1866 dual-channel kit
This 8 GB kit contains two 4 GB unbuffered DDR3 DIMMs rated at 1866 MHz with CL13 latency. The modules operate at 1.35 V and use a 240-pin UDIMM form factor. They are built with major-brand chips in a 2Rx8 configuration for desktop systems.
Suits DDR3 desktops needing a matched pair
Builders upgrading an existing DDR3 platform with two free slots will gain dual-channel bandwidth from this matched kit. Systems limited to lower DDR3 speeds, single-channel layouts, or ECC-only motherboards will not benefit from these modules.
Check motherboard DDR3 slot count and voltage
Verify that the board accepts 1.35 V DDR3 UDIMMs and has two available 240-pin slots for dual-channel operation. Confirm the BIOS can run memory at 1866 MHz or will down-clock automatically. Ensure the CPU memory controller supports this speed.
Besonderheiten
- 1866 MHz DDR3 speed boosts system responsiveness
- 35 V low-voltage operation reduces power draw
- Dual-channel 2 × 4 GB kit enables higher memory bandwidth
- CL13 latency supports snappy multitasking
- 240-pin UDIMM design allows straightforward desktop installation
Technische Daten
| Brand | RIMLANCE |
|---|---|
| Model | RUD14900LD8C2K8 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
Fragen zu diesem Artikel
Will this kit fit a standard desktop DDR3 slot?
Yes, each module is a 240-pin unbuffered DIMM designed for desktop DDR3 sockets.
Does the 1.35 V rating work with a board that only supports 1.5 V DDR3?
The modules run at 1.35 V and are backward compatible with 1.5 V DDR3 slots, operating at the higher voltage if required.
What total capacity and channel mode does the kit provide?
Two 4 GB sticks give 8 GB total and run in dual-channel mode when installed in matched slots.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
