BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
RIMLANCE
An 8 GB dual-channel DDR3 kit with two 4 GB unbuffered DIMMs running at 1866 MHz, CL13 latency and 1.35 V
This 8 GB kit contains two 4 GB unbuffered DDR3 DIMMs rated at 1866 MHz with CL13 latency. The modules operate at 1.35 V and use a 240-pin UDIMM form factor. They are built with major-brand chips in a 2Rx8 configuration for desktop systems.
Builders upgrading an existing DDR3 platform with two free slots will gain dual-channel bandwidth from this matched kit. Systems limited to lower DDR3 speeds, single-channel layouts, or ECC-only motherboards will not benefit from these modules.
Verify that the board accepts 1.35 V DDR3 UDIMMs and has two available 240-pin slots for dual-channel operation. Confirm the BIOS can run memory at 1866 MHz or will down-clock automatically. Ensure the CPU memory controller supports this speed.
| Brand | RIMLANCE |
|---|---|
| Model | RUD14900LD8C2K8 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
Yes, each module is a 240-pin unbuffered DIMM designed for desktop DDR3 sockets.
The modules run at 1.35 V and are backward compatible with 1.5 V DDR3 slots, operating at the higher voltage if required.
Two 4 GB sticks give 8 GB total and run in dual-channel mode when installed in matched slots.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?