Zyvpee
Zyvpee KDE1208PTV1 80x25mm 12V 1.8W 3-pin Maglev case fan
80 x 25 mm case fan with maglev bearing, 12 V power and 3-pin connector, spinning under 1600 RPM at 1.8 W
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Maglev bearing reduces friction for quieter operation
- 12 V 1.8 W power draw keeps energy use low
- 80 mm x 25 mm frame fits standard 8025 mounts
- Three-pin connector enables direct motherboard control
- Maximum speed below 1600 RPM balances airflow and noise
Zyvpee KDE1208PTV1 80 mm Maglev fan
The Zyvpee KDE1208PTV1 is an 80 mm by 25 mm case fan designed for CPU cooler mounting. It operates on 12 V power and draws 1.8 W. The three-pin connector provides simple voltage control for basic cooling setups.
Maglev bearing and three-pin wiring
A Maglev bearing reduces mechanical contact for quieter long-term operation. The black frame carries no LED lighting. Three wires on the 3-pin header deliver power and a tachometer signal so the motherboard can monitor fan speed.
Speed limit and connector constraint
Maximum rotation stays below 1600 RPM, which caps airflow for dense heatsinks. The 3-pin interface lacks PWM duty-cycle control, so speed adjustment relies on voltage scaling alone. Builders who need higher static pressure or precise low-speed regulation should check alternative models.
Besonderheiten
- Maglev bearing reduces friction for quieter operation
- 12 V 1.8 W power draw keeps energy use low
- 80 mm x 25 mm frame fits standard 8025 mounts
- Three-pin connector enables direct motherboard control
- Maximum speed below 1600 RPM balances airflow and noise
Technische Daten
| Brand | Zyvpee |
|---|---|
| Series | KDE1208PTV1 |
| Model | KDE1208PTV1 |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | No |
| Features | CPU Cooling FAN |
| Dimensions | 80*25MM |
Fragen zu diesem Artikel
What does the 3-pin connector limit for the Zyvpee KDE1208PTV1 fan?
The 3-pin connector supplies 12 V power and a tachometer signal, so speed is controlled by varying voltage rather than PWM duty cycle.
What clearance does the 80×25 mm frame need to fit?
The fan requires an 80 mm square mounting hole pattern and 25 mm depth, matching standard 8025 case-fan locations.
How is the Maglev bearing fan installed, and what step is often missed?
Mount with four screws through the corner holes, connect the 3-pin header to the motherboard, then enable voltage-based fan control in BIOS so the <1600 RPM limit is respected.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001046BTC
Auf Lager