저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 80 by 25 mm Maglev case fan with three-pin connector

Zyvpee

Zyvpee KDE1208PTV1 80x25mm 12V 1.8W 3-pin Maglev case fan

SKU CH-X2RS-0CD7R

80 x 25 mm case fan with maglev bearing, 12 V power and 3-pin connector, spinning under 1600 RPM at 1.8 W

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.8 W power draw keeps energy use low
  • 80 mm x 25 mm frame fits standard 8025 mounts
  • Three-pin connector enables direct motherboard control
  • Maximum speed below 1600 RPM balances airflow and noise

Zyvpee KDE1208PTV1 80 mm Maglev fan

The Zyvpee KDE1208PTV1 is an 80 mm by 25 mm case fan designed for CPU cooler mounting. It operates on 12 V power and draws 1.8 W. The three-pin connector provides simple voltage control for basic cooling setups.

Maglev bearing and three-pin wiring

A Maglev bearing reduces mechanical contact for quieter long-term operation. The black frame carries no LED lighting. Three wires on the 3-pin header deliver power and a tachometer signal so the motherboard can monitor fan speed.

Speed limit and connector constraint

Maximum rotation stays below 1600 RPM, which caps airflow for dense heatsinks. The 3-pin interface lacks PWM duty-cycle control, so speed adjustment relies on voltage scaling alone. Builders who need higher static pressure or precise low-speed regulation should check alternative models.

주요 특징

  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.8 W power draw keeps energy use low
  • 80 mm x 25 mm frame fits standard 8025 mounts
  • Three-pin connector enables direct motherboard control
  • Maximum speed below 1600 RPM balances airflow and noise

사양

BrandZyvpee
SeriesKDE1208PTV1
ModelKDE1208PTV1
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling FAN
Dimensions80*25MM

이 상품에 대한 질문

What does the 3-pin connector limit for the Zyvpee KDE1208PTV1 fan?

The 3-pin connector supplies 12 V power and a tachometer signal, so speed is controlled by varying voltage rather than PWM duty cycle.

What clearance does the 80×25 mm frame need to fit?

The fan requires an 80 mm square mounting hole pattern and 25 mm depth, matching standard 8025 case-fan locations.

How is the Maglev bearing fan installed, and what step is often missed?

Mount with four screws through the corner holes, connect the 3-pin header to the motherboard, then enable voltage-based fan control in BIOS so the <1600 RPM limit is respected.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.