OWC 8GB DDR3L 1866 CL13 1.35V UDIMM desktop RAM
- 8GB
- DDR3L 1866 (PC3L 14…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB kit of two 8 GB DDR3 1333 ECC registered RDIMMs for HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6 and BL490c G6 servers
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR3 1333 CL9 registered DIMMs built for HP ProLiant blade servers. The modules run at 1.5 V and include ECC error correction for data integrity in mission-critical workloads. They are validated for the BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 platforms. The 240-pin form factor matches the server memory slots exactly.
This memory will not work in standard desktop PCs, workstations that require unbuffered DIMMs, or any system that cannot accept registered ECC modules. Mixing these sticks with unbuffered memory is not supported and will prevent boot. Buyers needing non-ECC or consumer-speed RAM should look for a different product line altogether.
The registered buffer and 2Rx4 rank layout are the decisive factors for compatibility with the listed ProLiant blades. If your server requires registered ECC DDR3 at 1333 MT/s with this rank configuration, the kit fits; otherwise it will not post.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant BL280c G6 HP ProLiant BL2x220c G6 HP ProLiant BL2x220c G7 HP ProLiant BL460c G6 HP ProLiant BL490c G6 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each module operates at 1.5 volts, the standard for DDR3 1333 registered DIMMs, so total power scales with the number of populated slots in your ProLiant chassis.
The kit is validated for HP ProLiant BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 blades; other systems are not supported.
Yes, they replace HP part numbers 500662B21 and 593913B21, but all installed DIMMs must be ECC registered — mixing with unbuffered memory will prevent boot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?