暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 240-pin DDR3 RDIMM modules, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3 1333 CL9 ECC Registered RDIMM memory upgrade

SKU CH-QHV3-JZPHJ

16 GB kit of two 8 GB DDR3 1333 ECC registered RDIMMs for HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6 and BL490c G6 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 16 GB kit (2×8 GB) expands memory capacity for virtualisation
  • DDR3 1333 CL9 matches HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6, BL490c G6 specs
  • 5 V registered DIMMs lower power draw versus higher-voltage modules
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, AM231A, AM328A, FX622AA, FX622UT

16 GB DDR3-1333 ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3 1333 CL9 registered DIMMs built for HP ProLiant blade servers. The modules run at 1.5 V and include ECC error correction for data integrity in mission-critical workloads. They are validated for the BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 platforms. The 240-pin form factor matches the server memory slots exactly.

Not for desktops or unbuffered slots

This memory will not work in standard desktop PCs, workstations that require unbuffered DIMMs, or any system that cannot accept registered ECC modules. Mixing these sticks with unbuffered memory is not supported and will prevent boot. Buyers needing non-ECC or consumer-speed RAM should look for a different product line altogether.

Registered ECC with 2Rx4 organisation

The registered buffer and 2Rx4 rank layout are the decisive factors for compatibility with the listed ProLiant blades. If your server requires registered ECC DDR3 at 1333 MT/s with this rank configuration, the kit fits; otherwise it will not post.

特長

  • ECC registered design protects data integrity in server workloads
  • 16 GB kit (2×8 GB) expands memory capacity for virtualisation
  • DDR3 1333 CL9 matches HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6, BL490c G6 specs
  • 5 V registered DIMMs lower power draw versus higher-voltage modules
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, AM231A, AM328A, FX622AA, FX622UT

仕様

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL280c G6
HP ProLiant BL2x220c G6
HP ProLiant BL2x220c G7
HP ProLiant BL460c G6
HP ProLiant BL490c G6

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.5V DDR3 1333 RDIMM kit draw when the server runs continuously?

Each module operates at 1.5 volts, the standard for DDR3 1333 registered DIMMs, so total power scales with the number of populated slots in your ProLiant chassis.

Which HP ProLiant blade models must I already own for this 240-pin ECC registered kit to work?

The kit is validated for HP ProLiant BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 blades; other systems are not supported.

Can I add these CL9 2Rx4 modules alongside the original HP 500662B21 or 593913B21 DIMMs already in my BL460c G6?

Yes, they replace HP part numbers 500662B21 and 593913B21, but all installed DIMMs must be ECC registered — mixing with unbuffered memory will prevent boot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。