저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

OWC

OWC 16GB (2x8GB) DDR3 1333 CL9 ECC Registered RDIMM memory upgrade

SKU CH-QHV3-JZPHJ

16 GB kit of two 8 GB DDR3 1333 ECC registered RDIMMs for HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6 and BL490c G6 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 16 GB kit (2×8 GB) expands memory capacity for virtualisation
  • DDR3 1333 CL9 matches HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6, BL490c G6 specs
  • 5 V registered DIMMs lower power draw versus higher-voltage modules
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, AM231A, AM328A, FX622AA, FX622UT

16 GB DDR3-1333 ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3 1333 CL9 registered DIMMs built for HP ProLiant blade servers. The modules run at 1.5 V and include ECC error correction for data integrity in mission-critical workloads. They are validated for the BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 platforms. The 240-pin form factor matches the server memory slots exactly.

Not for desktops or unbuffered slots

This memory will not work in standard desktop PCs, workstations that require unbuffered DIMMs, or any system that cannot accept registered ECC modules. Mixing these sticks with unbuffered memory is not supported and will prevent boot. Buyers needing non-ECC or consumer-speed RAM should look for a different product line altogether.

Registered ECC with 2Rx4 organisation

The registered buffer and 2Rx4 rank layout are the decisive factors for compatibility with the listed ProLiant blades. If your server requires registered ECC DDR3 at 1333 MT/s with this rank configuration, the kit fits; otherwise it will not post.

주요 특징

  • ECC registered design protects data integrity in server workloads
  • 16 GB kit (2×8 GB) expands memory capacity for virtualisation
  • DDR3 1333 CL9 matches HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6, BL490c G6 specs
  • 5 V registered DIMMs lower power draw versus higher-voltage modules
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, AM231A, AM328A, FX622AA, FX622UT

사양

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL280c G6
HP ProLiant BL2x220c G6
HP ProLiant BL2x220c G7
HP ProLiant BL460c G6
HP ProLiant BL490c G6

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the 1.5V DDR3 1333 RDIMM kit draw when the server runs continuously?

Each module operates at 1.5 volts, the standard for DDR3 1333 registered DIMMs, so total power scales with the number of populated slots in your ProLiant chassis.

Which HP ProLiant blade models must I already own for this 240-pin ECC registered kit to work?

The kit is validated for HP ProLiant BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 blades; other systems are not supported.

Can I add these CL9 2Rx4 modules alongside the original HP 500662B21 or 593913B21 DIMMs already in my BL460c G6?

Yes, they replace HP part numbers 500662B21 and 593913B21, but all installed DIMMs must be ECC registered — mixing with unbuffered memory will prevent boot.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.