OWC 8GB DDR3L 1866 CL13 1.35V UDIMM desktop RAM
- 8GB
- DDR3L 1866 (PC3L 14…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB kit of two 8 GB DDR3 1333 ECC registered RDIMMs for HP ProLiant BL280c G6, BL2x220c G6/G7, BL460c G6 and BL490c G6 servers
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR3 1333 CL9 registered DIMMs built for HP ProLiant blade servers. The modules run at 1.5 V and include ECC error correction for data integrity in mission-critical workloads. They are validated for the BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 platforms. The 240-pin form factor matches the server memory slots exactly.
This memory will not work in standard desktop PCs, workstations that require unbuffered DIMMs, or any system that cannot accept registered ECC modules. Mixing these sticks with unbuffered memory is not supported and will prevent boot. Buyers needing non-ECC or consumer-speed RAM should look for a different product line altogether.
The registered buffer and 2Rx4 rank layout are the decisive factors for compatibility with the listed ProLiant blades. If your server requires registered ECC DDR3 at 1333 MT/s with this rank configuration, the kit fits; otherwise it will not post.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant BL280c G6 HP ProLiant BL2x220c G6 HP ProLiant BL2x220c G7 HP ProLiant BL460c G6 HP ProLiant BL490c G6 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Each module operates at 1.5 volts, the standard for DDR3 1333 registered DIMMs, so total power scales with the number of populated slots in your ProLiant chassis.
The kit is validated for HP ProLiant BL280c G6, BL2x220c G6, BL2x220c G7, BL460c G6 and BL490c G6 blades; other systems are not supported.
Yes, they replace HP part numbers 500662B21 and 593913B21, but all installed DIMMs must be ECC registered — mixing with unbuffered memory will prevent boot.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟