NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
64 GB DDR4 ECC registered RDIMM running at 3200 MT/s with CL22 latency and 1.2 V operation
This 64GB DDR4 3200 module is built for workstations and servers that require ECC Registered memory. It operates at CL22 latency with a 1.2V voltage and uses a 2Rx4 rank configuration on a 288-pin form factor. The part is designed as a direct replacement for the QNAP RAM-64GDR4ECK0-RD-3200 specification.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute sessions. JEDEC-standard timings ensure consistent throughput without reliance on overclocking headroom.
This module will not function in standard desktop computers or consumer motherboards that only support unbuffered non-ECC memory. It cannot be mixed with unbuffered DIMMs in the same system. Confirm your server or workstation explicitly requires DDR4 3200 ECC Registered RDIMMs and check the maximum supported capacity per slot.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module operates at 1.2V, the standard DDR4 voltage for registered ECC DIMMs, keeping power draw low during continuous server workloads.
A server or workstation motherboard with 288-pin DDR4 slots that explicitly supports ECC Registered memory is required; standard desktop boards will not work.
No — registered and unbuffered memory cannot be mixed; all installed DIMMs must be ECC Registered with matching specifications for stable operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?