NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
64 GB DDR4 ECC registered RDIMM running at 3200 MT/s with CL22 latency and 1.2 V operation
This 64GB DDR4 3200 module is built for workstations and servers that require ECC Registered memory. It operates at CL22 latency with a 1.2V voltage and uses a 2Rx4 rank configuration on a 288-pin form factor. The part is designed as a direct replacement for the QNAP RAM-64GDR4ECK0-RD-3200 specification.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute sessions. JEDEC-standard timings ensure consistent throughput without reliance on overclocking headroom.
This module will not function in standard desktop computers or consumer motherboards that only support unbuffered non-ECC memory. It cannot be mixed with unbuffered DIMMs in the same system. Confirm your server or workstation explicitly requires DDR4 3200 ECC Registered RDIMMs and check the maximum supported capacity per slot.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module operates at 1.2V, the standard DDR4 voltage for registered ECC DIMMs, keeping power draw low during continuous server workloads.
A server or workstation motherboard with 288-pin DDR4 slots that explicitly supports ECC Registered memory is required; standard desktop boards will not work.
No — registered and unbuffered memory cannot be mixed; all installed DIMMs must be ECC Registered with matching specifications for stable operation.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?