NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
OWC
64 GB DDR4 ECC registered RDIMM running at 3200 MT/s with CL22 latency and 1.2 V operation
This 64GB DDR4 3200 module is built for workstations and servers that require ECC Registered memory. It operates at CL22 latency with a 1.2V voltage and uses a 2Rx4 rank configuration on a 288-pin form factor. The part is designed as a direct replacement for the QNAP RAM-64GDR4ECK0-RD-3200 specification.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute sessions. JEDEC-standard timings ensure consistent throughput without reliance on overclocking headroom.
This module will not function in standard desktop computers or consumer motherboards that only support unbuffered non-ECC memory. It cannot be mixed with unbuffered DIMMs in the same system. Confirm your server or workstation explicitly requires DDR4 3200 ECC Registered RDIMMs and check the maximum supported capacity per slot.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module operates at 1.2V, the standard DDR4 voltage for registered ECC DIMMs, keeping power draw low during continuous server workloads.
A server or workstation motherboard with 288-pin DDR4 slots that explicitly supports ECC Registered memory is required; standard desktop boards will not work.
No — registered and unbuffered memory cannot be mixed; all installed DIMMs must be ECC Registered with matching specifications for stable operation.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?