NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
64 GB DDR4 ECC registered RDIMM running at 3200 MT/s with CL22 latency and 1.2 V operation
This 64GB DDR4 3200 module is built for workstations and servers that require ECC Registered memory. It operates at CL22 latency with a 1.2V voltage and uses a 2Rx4 rank configuration on a 288-pin form factor. The part is designed as a direct replacement for the QNAP RAM-64GDR4ECK0-RD-3200 specification.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute sessions. JEDEC-standard timings ensure consistent throughput without reliance on overclocking headroom.
This module will not function in standard desktop computers or consumer motherboards that only support unbuffered non-ECC memory. It cannot be mixed with unbuffered DIMMs in the same system. Confirm your server or workstation explicitly requires DDR4 3200 ECC Registered RDIMMs and check the maximum supported capacity per slot.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module operates at 1.2V, the standard DDR4 voltage for registered ECC DIMMs, keeping power draw low during continuous server workloads.
A server or workstation motherboard with 288-pin DDR4 slots that explicitly supports ECC Registered memory is required; standard desktop boards will not work.
No — registered and unbuffered memory cannot be mixed; all installed DIMMs must be ECC Registered with matching specifications for stable operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?