NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
64 GB DDR4 ECC registered RDIMM running at 3200 MT/s with CL22 latency and 1.2 V operation
This 64GB DDR4 3200 module is built for workstations and servers that require ECC Registered memory. It operates at CL22 latency with a 1.2V voltage and uses a 2Rx4 rank configuration on a 288-pin form factor. The part is designed as a direct replacement for the QNAP RAM-64GDR4ECK0-RD-3200 specification.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute sessions. JEDEC-standard timings ensure consistent throughput without reliance on overclocking headroom.
This module will not function in standard desktop computers or consumer motherboards that only support unbuffered non-ECC memory. It cannot be mixed with unbuffered DIMMs in the same system. Confirm your server or workstation explicitly requires DDR4 3200 ECC Registered RDIMMs and check the maximum supported capacity per slot.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module operates at 1.2V, the standard DDR4 voltage for registered ECC DIMMs, keeping power draw low during continuous server workloads.
A server or workstation motherboard with 288-pin DDR4 slots that explicitly supports ECC Registered memory is required; standard desktop boards will not work.
No — registered and unbuffered memory cannot be mixed; all installed DIMMs must be ECC Registered with matching specifications for stable operation.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?