BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
RIMLANCE
A 16 GB dual-channel DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V operation for standard desktop upgrades
This RIMLANCE kit supplies 16GB of DDR4 memory across two 8GB modules. It runs at 3200MHz with a CAS latency of 22 and operates at 1.2V. The unbuffered, non-ECC DIMMs use a 288-pin form factor built with major-brand chipsets for desktop systems.
The dual-channel 16GB capacity suits everyday multitasking, office applications and mainstream gaming on DDR4 platforms. Buyers who need ECC error correction or registered modules for workstation or server boards should look elsewhere. Systems limited to lower DDR4 speeds or requiring single-rank configurations beyond 1Rx16 may not reach the rated frequency.
Installation follows the standard 288-pin DDR4 procedure: align the notch, press firmly until the retention clips click, and ensure both modules seat in the correct slots for dual-channel operation. The most common issue is the system defaulting to a lower speed until the XMP or DOCP profile is enabled in the BIOS. mezclando 1Rx16 modules with different rank layouts can also prevent the kit from running at 3200MHz.
| Brand | RIMLANCE |
|---|---|
| Model | RUD25600S6C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Yes, the modules are 288‑pin DDR4 3200 UDIMM running at 1.2 V with CL22, matching the standard desktop DDR4 3200 specification.
The kit is rated at 3200 MHz CL22; most current DDR4 platforms will run it at that speed by default, but enabling the memory profile in BIOS guarantees the rated frequency.
The kit contains two 8 GB sticks, so it fits a two‑slot board and provides the full 16 GB capacity without leaving an empty slot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?