BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
RIMLANCE
A 16 GB dual-channel DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V operation for standard desktop upgrades
This RIMLANCE kit supplies 16GB of DDR4 memory across two 8GB modules. It runs at 3200MHz with a CAS latency of 22 and operates at 1.2V. The unbuffered, non-ECC DIMMs use a 288-pin form factor built with major-brand chipsets for desktop systems.
The dual-channel 16GB capacity suits everyday multitasking, office applications and mainstream gaming on DDR4 platforms. Buyers who need ECC error correction or registered modules for workstation or server boards should look elsewhere. Systems limited to lower DDR4 speeds or requiring single-rank configurations beyond 1Rx16 may not reach the rated frequency.
Installation follows the standard 288-pin DDR4 procedure: align the notch, press firmly until the retention clips click, and ensure both modules seat in the correct slots for dual-channel operation. The most common issue is the system defaulting to a lower speed until the XMP or DOCP profile is enabled in the BIOS. mezclando 1Rx16 modules with different rank layouts can also prevent the kit from running at 3200MHz.
| Brand | RIMLANCE |
|---|---|
| Model | RUD25600S6C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Yes, the modules are 288‑pin DDR4 3200 UDIMM running at 1.2 V with CL22, matching the standard desktop DDR4 3200 specification.
The kit is rated at 3200 MHz CL22; most current DDR4 platforms will run it at that speed by default, but enabling the memory profile in BIOS guarantees the rated frequency.
The kit contains two 8 GB sticks, so it fits a two‑slot board and provides the full 16 GB capacity without leaving an empty slot.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?