BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
RIMLANCE
A 16 GB dual-channel DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V operation for standard desktop upgrades
This RIMLANCE kit supplies 16GB of DDR4 memory across two 8GB modules. It runs at 3200MHz with a CAS latency of 22 and operates at 1.2V. The unbuffered, non-ECC DIMMs use a 288-pin form factor built with major-brand chipsets for desktop systems.
The dual-channel 16GB capacity suits everyday multitasking, office applications and mainstream gaming on DDR4 platforms. Buyers who need ECC error correction or registered modules for workstation or server boards should look elsewhere. Systems limited to lower DDR4 speeds or requiring single-rank configurations beyond 1Rx16 may not reach the rated frequency.
Installation follows the standard 288-pin DDR4 procedure: align the notch, press firmly until the retention clips click, and ensure both modules seat in the correct slots for dual-channel operation. The most common issue is the system defaulting to a lower speed until the XMP or DOCP profile is enabled in the BIOS. mezclando 1Rx16 modules with different rank layouts can also prevent the kit from running at 3200MHz.
| Brand | RIMLANCE |
|---|---|
| Model | RUD25600S6C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Yes, the modules are 288‑pin DDR4 3200 UDIMM running at 1.2 V with CL22, matching the standard desktop DDR4 3200 specification.
The kit is rated at 3200 MHz CL22; most current DDR4 platforms will run it at that speed by default, but enabling the memory profile in BIOS guarantees the rated frequency.
The kit contains two 8 GB sticks, so it fits a two‑slot board and provides the full 16 GB capacity without leaving an empty slot.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?