BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
RIMLANCE
A 16 GB dual-channel DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V operation for standard desktop upgrades
This RIMLANCE kit supplies 16GB of DDR4 memory across two 8GB modules. It runs at 3200MHz with a CAS latency of 22 and operates at 1.2V. The unbuffered, non-ECC DIMMs use a 288-pin form factor built with major-brand chipsets for desktop systems.
The dual-channel 16GB capacity suits everyday multitasking, office applications and mainstream gaming on DDR4 platforms. Buyers who need ECC error correction or registered modules for workstation or server boards should look elsewhere. Systems limited to lower DDR4 speeds or requiring single-rank configurations beyond 1Rx16 may not reach the rated frequency.
Installation follows the standard 288-pin DDR4 procedure: align the notch, press firmly until the retention clips click, and ensure both modules seat in the correct slots for dual-channel operation. The most common issue is the system defaulting to a lower speed until the XMP or DOCP profile is enabled in the BIOS. mezclando 1Rx16 modules with different rank layouts can also prevent the kit from running at 3200MHz.
| Brand | RIMLANCE |
|---|---|
| Model | RUD25600S6C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Yes, the modules are 288‑pin DDR4 3200 UDIMM running at 1.2 V with CL22, matching the standard desktop DDR4 3200 specification.
The kit is rated at 3200 MHz CL22; most current DDR4 platforms will run it at that speed by default, but enabling the memory profile in BIOS guarantees the rated frequency.
The kit contains two 8 GB sticks, so it fits a two‑slot board and provides the full 16 GB capacity without leaving an empty slot.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?