BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
RIMLANCE
A 16 GB dual-channel DDR4 kit running at 3200 MHz with CL22 latency and 1.2 V operation for standard desktop upgrades
This RIMLANCE kit supplies 16GB of DDR4 memory across two 8GB modules. It runs at 3200MHz with a CAS latency of 22 and operates at 1.2V. The unbuffered, non-ECC DIMMs use a 288-pin form factor built with major-brand chipsets for desktop systems.
The dual-channel 16GB capacity suits everyday multitasking, office applications and mainstream gaming on DDR4 platforms. Buyers who need ECC error correction or registered modules for workstation or server boards should look elsewhere. Systems limited to lower DDR4 speeds or requiring single-rank configurations beyond 1Rx16 may not reach the rated frequency.
Installation follows the standard 288-pin DDR4 procedure: align the notch, press firmly until the retention clips click, and ensure both modules seat in the correct slots for dual-channel operation. The most common issue is the system defaulting to a lower speed until the XMP or DOCP profile is enabled in the BIOS. mezclando 1Rx16 modules with different rank layouts can also prevent the kit from running at 3200MHz.
| Brand | RIMLANCE |
|---|---|
| Model | RUD25600S6C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Yes, the modules are 288‑pin DDR4 3200 UDIMM running at 1.2 V with CL22, matching the standard desktop DDR4 3200 specification.
The kit is rated at 3200 MHz CL22; most current DDR4 platforms will run it at that speed by default, but enabling the memory profile in BIOS guarantees the rated frequency.
The kit contains two 8 GB sticks, so it fits a two‑slot board and provides the full 16 GB capacity without leaving an empty slot.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟