Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare hard drive with exposed circuit board

Seagate

Seagate BarraCuda ST2000DM008 2TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-A85E-3JSZX MPN ST2000DM008

A 2 TB 3.5-inch desktop hard drive spinning at 7200 RPM with 256 MB cache and a SATA 6.0 Gb/s interface for everyday computing

  • InterfaceSATA 6.0Gb/s
  • Capacity2TB
  • RPM7200 RPM
  • Cache256MB
  • FeaturesVersatile HDDs for all your PC needs bring you industry-lead
  • UsageFor Daily Computing

Options 2TB 7200RPM

  • 2TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers quick file access
  • 256MB cache buffer accelerates burst data transfers
  • SATA 6.0Gb/s interface provides broad desktop compatibility
  • Advanced power modes reduce energy use during operation

BarraCuda 2 TB 7200 RPM SATA Drive

The Seagate BarraCuda ST2000DM008 is a 2 TB 3.5 inch desktop hard drive that spins at 7200 RPM and connects through a SATA 6.0 Gb/s interface. It carries a 256 MB cache and measures 146.99 mm long, 101.85 mm wide and 20.20 mm high. The drive is supplied new and is built for everyday computing tasks.

Suits general desktop storage and bulk data

This drive fits users who need affordable high-capacity storage for documents, media libraries or backup on a standard desktop PC. Buyers who require the low latency or high sustained throughput of solid-state storage should consider a different technology. Systems limited to the older SATA 3.0 Gb/s standard will not reach the interface burst speed this model offers.

SATA 6.0 Gb/s interface decides compatibility

The single specification that determines whether this is the correct part is the SATA 6.0 Gb/s interface. Your motherboard or controller must provide a matching SATA port to install the drive and achieve its rated burst performance. Without that port the drive will not function as intended.

Kohokohdat

  • 2TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers quick file access
  • 256MB cache buffer accelerates burst data transfers
  • SATA 6.0Gb/s interface provides broad desktop compatibility
  • Advanced power modes reduce energy use during operation

Tekniset tiedot

BrandSeagate
SeriesBarraCuda
ModelST2000DM008
InterfaceSATA 6.0Gb/s
Capacity2TB
RPM7200 RPM
Cache256MB
FeaturesVersatile HDDs for all your PC needs bring you industry-leading excellence in personal computing.
For over 20 years the BarraCuda family has delivered super-reliable storage for the hard drive industry.
Capacities up to 8TB for desktops, BarraCuda leads the market with the widest range of storage options available.
Advanced Power modes help save energy without sacrificing performance.
SATA 6Gb/s interface optimizes burst performance.
UsageFor Daily Computing
Form Factor3.5"
Height (maximum)20.20mm
Width (maximum)101.85mm
Length (maximum)146.99mm
Lähetyspaino0.40 kg
Pakkauksen mitat152 × 104 × 25 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What practical throughput does the SATA 6.0Gb/s interface cap at on this drive?

The SATA 6.0Gb/s interface supports up to 6.0Gb/s burst speeds, while sustained transfer rates are limited by the 7200 RPM platters and 256MB cache.

Will the 146.99mm length and 20.20mm height fit a standard 3.5" desktop bay?

Yes, the drive measures 146.99mm long, 101.85mm wide and 20.20mm high, matching the standard 3.5" form factor used in desktop cases and drive cages.

How do I install this bare drive, and which step is often missed?

Mount the drive using four 3.5" screws, connect a SATA data cable to the motherboard and a SATA power cable from the PSU, then initialise and format the 2TB volume in the OS — the formatting step is frequently overlooked.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.