Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square grey silicone thermal pad 100 by 100 by 1.5 mm

UPSIREN

UPSIREN OEM 21W/mK Thermal Pad 100x100x1.5mm 23g

SKU CH-Z1J3-8BYJH

A 100 × 100 × 1.5 mm silicone thermal pad rated at 21 W/mK conductivity, non-conductive and reusable from −40 °C to 200 °C

  • Volume / Net Weight23g
  • Thermal Conductivity21W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100 x 100 x 1.5 mm

  • 21 W/mK conductivity moves heat fast from chip to heatsink
  • Soft 30 Shore pad compresses to fill uneven gaps for full contact
  • Non-conductive silicone prevents shorts while insulating sensitive electronics
  • Stable from -40 °C to 200 °C without melting or curing
  • Pre-cut 100 × 100 × 1.5 mm sheet fits common GPU and CPU coolers

UPSIREN OEM 21W/mK Thermal Pad

This UPSIREN OEM thermal pad measures 100x100x1.5mm and weighs 23g. It provides a thermal conductivity of 21W/mK for CPU, GPU, laptop heatsink or LED cooler applications. The silicone pad is non-conductive and non-corrosive. It suits builders who need a single reusable interface sheet.

Installation and common issues

The pad has a hardness of 30 degrees, making it soft and compressible for easy assembly. Natural viscosity allows it to fit closely to the chip surface and be reused. It is non-curing and non-toxic, so it will not dry out or damage components. Users who need a pre-applied paste or a thinner gap filler should look elsewhere.

Sustained load behaviour

Rated for long-term operation from -40 to 200°C, the pad will not melt under continuous high temperatures. It maintains insulation, anti-static and fire-retardant properties during extended use. The material resists wear, compression set and corrosion over time. Buyers requiring a liquid metal compound for extreme overclocking cannot use this pad.

Kohokohdat

  • 21 W/mK conductivity moves heat fast from chip to heatsink
  • Soft 30 Shore pad compresses to fill uneven gaps for full contact
  • Non-conductive silicone prevents shorts while insulating sensitive electronics
  • Stable from -40 °C to 200 °C without melting or curing
  • Pre-cut 100 × 100 × 1.5 mm sheet fits common GPU and CPU coolers

Tekniset tiedot

BrandUPSIREN
SeriesOEM
Model21W
Volume / Net Weight23g
Thermal Conductivity21W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the pad is performing correctly after installation?

Monitor component temperatures under load; the pad is rated for 21 W/mK conductivity and stable operation from -40 to 200 °C.

What does the package contain and is anything else required?

One 100 × 100 × 1.5 mm silicone pad weighing 23 g; no extra materials are needed for installation.

Which thickness should I choose for my application?

This model is 1.5 mm thick with 30-degree Shore hardness, suited for gaps matching that dimension.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.