ASRock
ASRock RX6800XT PGD 16GO graphics card
Refurbished Radeon RX 6800 XT with 16GB GDDR6, 4608 stream processors, boost clock 2310 MHz, triple-fan cooler, HDMI 2.1 VRR and three DisplayPort 1.4 outputs
- InterfacePCI Express 4.0
- Chipset ManufacturerAMD
- GPU SeriesAMD Radeon RX 6000 Series
- GPURadeon RX 6800 XT
- Core Clock1875 MHz
- Boost Clock2310 MHz
- 16GB GDDR6 memory at 16 Gbps fuels high-resolution textures
- 4608 stream processors on AMD RDNA 2 architecture deliver strong compute performance
- Boost clock reaches 2310 MHz for responsive gaming frame rates
- HDMI 2.1 VRR plus three DisplayPort 1.4 outputs drive four 8K displays
- Triple-fan Phantom Gaming 3X cooler with 0dB silent mode keeps thermals in check
Phantom Gaming D 16GB graphics card
The ASRock Radeon RX 6800 XT Phantom Gaming D is a refurbished ATX graphics card with 16GB GDDR6 memory on a 256-bit interface. It targets enthusiasts who want high-frame-rate gaming at 1440p or entry-level 4K. The board uses the AMD RDNA 2 GPU with 4608 stream processors and a PCI Express 4.0 x16 connection.
Sustained load behaviour with 300W TDP
Under continuous load the card draws up to 300W through three 8-pin power connectors, so an 800W power supply is recommended. The Phantom Gaming 3X cooling system uses three striped axial fans and a reinforced metal frame to move heat away from the GPU. A 0dB silent mode stops the fans completely when temperatures are low, reducing noise during lighter workloads.
Compatibility checks before ordering
Verify that your case can fit a 330mm long card that occupies 2.8 slots and measures 12.99 by 5.51 inches. Ensure the motherboard has a free PCI Express 4.0 x16 slot and that the power supply provides three 8-pin PCIe connectors. The rear bracket offers one HDMI 2.1 VRR port and three DisplayPort 1.4 with DSC outputs for up to four monitors at 7680 x 4320 resolution.
Points forts
- 16GB GDDR6 memory at 16 Gbps fuels high-resolution textures
- 4608 stream processors on AMD RDNA 2 architecture deliver strong compute performance
- Boost clock reaches 2310 MHz for responsive gaming frame rates
- HDMI 2.1 VRR plus three DisplayPort 1.4 outputs drive four 8K displays
- Triple-fan Phantom Gaming 3X cooler with 0dB silent mode keeps thermals in check
Caractéristiques
| Brand | ASRock |
|---|---|
| Series | Phantom Gaming D |
| Model | RX6800XT PGD 16GO |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 6000 Series |
| GPU | Radeon RX 6800 XT |
| Core Clock | 1875 MHz |
| Boost Clock | 2310 MHz |
| Stream Processors | 4608 |
| Effective Memory Clock | 16 Gbps |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 VRR |
| DisplayPort | 3 x DisplayPort 1.4 with DSC |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 300W |
| System Requirements | Recommended PSU - 800W |
| Recommended PSU Wattage | 800W |
| Power Connector | 3 x 8-Pin |
| HDCP Ready | Yes |
| Features | Polychrome SYNC Phantom Gaming 3X Cooling System Striped Axial Fan Reinforced Metal Frame Stylish Metal Backplate 0dB Silent Cooling Super Alloy Graphics Card |
| Form Factor | ATX |
| Max GPU Length | 330 mm |
| Card Dimensions (L x H) | 12.99" x 5.51" |
| Slot Width | 2.8-slot |
| Poids d’expédition | 2.63 kg |
| Dimensions du colis | 425 × 248 × 140 mm |
Questions sur cet article
How loud and hot does the Phantom Gaming 3X cooling system run with its 300W thermal design power during all-day loads?
The triple-fan design includes 0dB silent cooling that stops the fans at low temperatures, while the striped axial fans and reinforced metal frame move heat off the 300W GPU through a 2.8-slot heatsink.
What power supply and connectors must my system already have to run this card?
An 800W PSU with three 8-pin PCIe power cables is required to feed the 300W board power.
Will the PCI Express 4.0 x16 interface and 330mm length work in my older ATX case and motherboard?
The card fits a standard ATX slot and needs 330mm clearance; it runs at PCIe 4.0 speeds but is backward compatible with PCIe 3.0 motherboards.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00354624BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418017BTC
En stock