ASUS
ASUS ATS Radeon RX 9070 12GB graphics card ATS-RX9070GRE-O12G
12GB GDDR6 RDNA 4 GPU with 3072 stream processors, 192-bit bus, 432 GB/s bandwidth, PCIe 5.0 x16, 220 W TDP, HDMI 2.1b and triple DisplayPort 2.1a for 7680×4320 output
- InterfacePCI Express 5.0 x16
- Chipset ManufacturerAMD
- GPU SeriesAMD Radeon RX 9000 Series
- GPURadeon RX 9070
- ArchitectureRDNA 4
- Stream Processors3072
- RDNA 4 architecture delivers 34.3 TFLOPs compute performance
- 12 GB GDDR6 memory at 18 Gbps provides 432 GB/s bandwidth
- Triple axial-tech fans with phase-change thermal pad keep 220 W TDP cool
- HDMI 2.1b and three DisplayPort 2.1a outputs drive 7680 × 4320 resolution
- Dual 8-pin power connectors support factory OC boost clock of 2880 MHz
ASUS ATS Radeon RX 9070 12GB for 1440p gaming
The ASUS ATS Radeon RX 9070 12GB targets 1440p gaming with the RDNA 4 architecture. It delivers 3072 stream processors and 12GB of GDDR6 memory across a 192-bit bus. Factory profiles reach a 2880 MHz boost clock in OC mode. The board draws up to 220 W typical board power.
Dual 8-pin power and triple-fan cooling
Dual 8-pin connectors feed the 220 W typical board power, so a 650 W 80 PLUS Bronze or better supply is specified. Triple axial-tech fans with double ball bearings move air through a MaxContact mirror-finish heatsink and phase-change thermal interface. A metal backplate and reinforced frame stiffen the full-length PCB. One HDMI 2.1b and three DisplayPort 2.1a outputs drive up to four displays at 7680 x 4320.
Verify PCIe 5.0 x16 slot and case length
Confirm the motherboard provides a PCI Express 5.0 x16 slot for full bandwidth. Measure case clearance for a triple-slot, full-length card and check that two 8-pin power cables reach without strain. Ensure the power unit meets the 650 W minimum with the required connectors. Driver support for DirectX 12 and OpenGL 4.6 should be current.
Points forts
- RDNA 4 architecture delivers 34.3 TFLOPs compute performance
- 12 GB GDDR6 memory at 18 Gbps provides 432 GB/s bandwidth
- Triple axial-tech fans with phase-change thermal pad keep 220 W TDP cool
- HDMI 2.1b and three DisplayPort 2.1a outputs drive 7680 × 4320 resolution
- Dual 8-pin power connectors support factory OC boost clock of 2880 MHz
Caractéristiques
| Brand | ASUS |
|---|---|
| Series | ATS |
| Model | ATS-RX9070GRE-O12G |
| Part Number | ATS-RX9070GRE-O12G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 |
| Architecture | RDNA 4 |
| Stream Processors | 3072 |
| Effective Memory Clock | 18 Gbps |
| Memory Size | 12GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1b |
| DisplayPort | 3 x DisplayPort 2.1a |
| Max Resolution | 7680 x 4320 |
| Cooler | Triple Fans |
| Thermal Design Power | 220W |
Questions sur cet article
What bandwidth does the PCI Express 5.0 x16 interface provide for the ATS-RX9070GRE-O12G?
The PCI Express 5.0 x16 interface delivers up to 64 GB/s of theoretical bandwidth, capping the maximum data transfer rate between the GPU and the rest of the system.
What physical space and power connectors does the ATS-RX9070GRE-O12G require to fit and mount?
The card uses a triple-fan cooler and needs two 8-pin power connectors; a 650 W PSU is recommended to meet the 220 W typical board power.
How is the ATS-RX9070GRE-O12G installed, and which step do builders often miss?
Seat the card in the primary PCIe 5.0 x16 slot, attach both 8-pin power cables, then connect the display cables — builders often forget the second 8-pin connector.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355238BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418741BTC
En stock