Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Silver rectangular 2.5 inch SATA SSD with label

Crucial

Crucial MX500 CT2000MX500SSD1 2TB 2.5" SATA internal SSD

SKU CH-ZEQ0-5JCK4

2.5-inch SATA SSD with 2TB 3D NAND, up to 560 MB/s read and 510 MB/s write, AES 256-bit encryption, 360 TBW and 1.8 million hours MTTF

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity2TB
  • Memory Components3D NAND
  • InterfaceSATA III
  • Up to 560 MB/s sequential read speed for fast boot times
  • Up to 510 MB/s sequential write speed for quick file saves
  • AES 256-bit hardware encryption protects data from unauthorised access
  • Integrated Power Loss Immunity preserves work during unexpected power cuts
  • 360 TBW endurance rating with 1.8 million hours MTTF for long-term reliability

2TB SATA SSD for everyday systems

The Crucial MX500 CT2000MX500SSD1 is a 2TB 2.5-inch internal solid state drive with a SATA III interface. It uses Micron 3D NAND and delivers sequential reads up to 560 MBps and writes up to 510 MBps. Random performance reaches 95,000 read IOPS and 90,000 write IOPS. AES 256-bit hardware encryption and Integrated Power Loss Immunity protect stored data.

Suits SATA capacity upgrades; not for PCIe-only bays

This drive suits users adding high-capacity flash storage to a SATA-connected laptop or desktop. It is not compatible with slots that accept only PCIe-signalling devices. Buyers needing the lowest latency or highest throughput should consider drives built for PCIe interfaces instead.

Sequential read speed of 560 MBps

The headline sequential read figure of 560 MBps defines the practical ceiling for large file transfers on the SATA bus. If your workload demands sustained throughput above this level, a PCIe-based drive is required; otherwise this MX500 delivers consistent performance within the SATA limit.

Points forts

  • Up to 560 MB/s sequential read speed for fast boot times
  • Up to 510 MB/s sequential write speed for quick file saves
  • AES 256-bit hardware encryption protects data from unauthorised access
  • Integrated Power Loss Immunity preserves work during unexpected power cuts
  • 360 TBW endurance rating with 1.8 million hours MTTF for long-term reliability

Caractéristiques

BrandCrucial
SeriesMX500
ModelCT2000MX500SSD1
Part NumberCT250MX500SSD1
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form Factor2.5"
Capacity2TB
Memory Components3D NAND
InterfaceSATA III
ProtocolSATA
Cache0MB
EncryptionAES 256-bit encryption
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 510 MBps
4KB Random ReadUp to 95,000 IOPS
4KB Random WriteUp to 90,000 IOPS
Terabytes Written (TBW)360TB
MTTF1.8 million hours
FeaturesDynamic Write Acceleration
Redundant Array of Independent NAND (RAIN)
Multistep Data Integrity Algorithm
Adaptive Thermal Protection
Integrated Power Loss Immunity
Active Garbage Collection
TRIM Support
Self-Monitoring and Reporting Technology (SMART)
Error Correction Code (ECC)
Device Sleep Support
Operating Temperature0°C ~ +70°C
Height7.00mm
Package Content2.5-inch 7mm SSD SATA 6Gb/s
7mm to 9.5mm spacer
Acronis True Image for Crucial cloning software and installation instructions

Questions sur cet article

Will my existing SATA cable and 2.5″ drive bay work with this 2TB MX500?

Yes, it uses a standard SATA III interface and a 2.5″ form factor, so any SATA data cable, SATA power connector and 2.5″ bay or caddy will fit.

Can I keep an older SATA II mechanical drive on the same controller while using this MX500?

The MX500 operates on SATA III and will share the controller with legacy SATA devices; each drive runs at its own negotiated link speed.

How can I verify the drive is delivering its rated 560 MB/s read and 510 MB/s write after installation?

Run a sequential benchmark such as CrystalDiskMark; results near 560 MB/s read and 510 MB/s write confirm the drive is performing to specification.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.