DELL
DELL PowerEdge R630 8SFF 2x Xeon E5-2667 v4 3.2GHz 384GB DDR4 No Drive
A 1U rack server with dual Xeon E5-2667 v4 processors at 3.2GHz, 384GB DDR4 memory, PERC H730 controller, and eight 2.5-inch drive bays — drives not included
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2667 v4 CPUs at 3.2GHz for high single-thread performance
- 384GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage
- iDRAC8 Enterprise remote management simplifies lights-out administration
- 5TB maximum memory capacity allows future expansion without chassis change
Ready-to-deploy 2U rack server
The Dell PowerEdge R630 arrives with two Xeon E5-2667 v4 processors at 3.2GHz and 384GB of DDR4 ECC registered memory pre-installed. Eight 2.5-inch drive bays and a PERC H730 SAS controller are ready for your choice of SATA storage. Integrated graphics and iDRAC8 Enterprise remote management come standard.
Thermals, noise and power in normal use
Dual 495W power supplies share the load for redundancy while the system idles or handles light virtualisation workloads. Fan speeds remain moderate in a temperature-controlled rack and the 1U form factor keeps airflow predictable. Power draw scales with CPU utilisation rather than spiking on minor tasks.
Sustained-load behaviour under continuous demand
Under prolonged compute pressure both eight-core processors maintain their 3.2GHz base frequency thanks to the 25MB L3 cache per socket and the 1.5TB maximum memory headroom. The H730 controller sustains RAID throughput without throttling and iDRAC8 remains responsive for remote monitoring throughout extended runs.
Points forts
- Dual Xeon E5-2667 v4 CPUs at 3.2GHz for high single-thread performance
- 384GB DDR4 ECC registered memory supports large virtualisation workloads
- Eight 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage
- iDRAC8 Enterprise remote management simplifies lights-out administration
- 5TB maximum memory capacity allows future expansion without chassis change
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 3.840,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the 3.2GHz Xeon E5-2667 v4 processors and what step is often missed?
The two processors are already installed in the sockets. The step people miss is confirming the BIOS and firmware are at the latest stable version before adding workloads.
What maintenance will the 384GB DDR4 memory and PERC H730 controller need later?
The DDR4 ECC registered modules require no scheduled replacement. The PERC H730 SAS controller may need a battery or capacitor module swap if the write-back cache backup degrades over time.
What limit appears first when the 8SFF chassis runs sustained loads with dual 495W supplies?
The 8 x 2.5-inch drive bays and dual 495W power supplies set the thermal and power ceiling; sustained heavy I/O across all bays will hit the chassis cooling limit before the CPUs throttle.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



