DELL
DELL PowerEdge R730xd 12LFF Xeon E5-2699 v4 2.2GHz 22C 192GB DDR4 No Drive
12-bay 3.5-inch rack server with one 22-core Xeon at 2.2 GHz, 192 GB DDR4 and PERC H730 controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size192GB
- 22 cores at 2.2 GHz handle heavy workloads with Xeon E5-2699 v4
- 192 GB DDR4 ECC registered memory supports large datasets and virtualisation
- 12 large-form-factor 3.5-inch drive bays give high-capacity storage flexibility
- PERC H730 SAS controller provides hardware RAID for data protection
- iDRAC8 Enterprise enables remote management and firmware updates
Rack server with 12-bay 3.5" chassis
The Dell PowerEdge R730xd is a 2U rack server built around a single Xeon E5-2699 v4 processor running at 2.2GHz with 22 cores and 192GB of DDR4 ECC registered memory. It ships with a PERC H730 SAS RAID controller and an Intel network card providing two 10GbE and two 1GbE ports. Dual 1100W power supplies and iDRAC8 Enterprise remote management are installed. No drives are included.
Suits dense storage workloads; not for GPU compute
This configuration fits buyers who need up to 12 large-form-factor drives in a compact rack footprint for backup, archive or software-defined storage clusters. The single-socket layout and integrated graphics make it unsuitable for workloads that require GPU acceleration or the highest per-core frequencies. Buyers who need more than 192GB of memory today should note the board supports up to 768GB when fully populated.
12 x 3.5" drive bays with SAS/SATA support
The chassis provides twelve hot-plug 3.5-inch bays connected to the PERC H730 controller, accepting both SAS and SATA drives. This bay count is the defining constraint for capacity planning; each bay takes one drive and the controller manages RAID across the set.
Points forts
- 22 cores at 2.2 GHz handle heavy workloads with Xeon E5-2699 v4
- 192 GB DDR4 ECC registered memory supports large datasets and virtualisation
- 12 large-form-factor 3.5-inch drive bays give high-capacity storage flexibility
- PERC H730 SAS controller provides hardware RAID for data protection
- iDRAC8 Enterprise enables remote management and firmware updates
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 6,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Will the 12 3.5-inch bays accept the SATA drives I already own?
Yes, the chassis provides twelve 3.5-inch bays wired to the PERC H730 SAS controller which also supports SATA drives.
How can I confirm the Xeon E5-2699 v4 and 192 GB DDR4 are recognised after first boot?
Open the iDRAC8 Enterprise interface or enter the BIOS; both will show one 22-core processor at 2.2 GHz and 192 GB of DDR4 ECC registered memory.
Does the server ship with drive caddies and rails, or must I order them separately?
The unit includes two 1100 W power supplies, the PERC H730 card and the Intel 2×10 GbE + 2×1 GbE network card; drive caddies and rail kit are not included and must be purchased separately.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
