We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 12LFF Xeon E5-2699 v4 2.2GHz 22C 192GB DDR4 No Drive

SKU CH-3WBZ-TG3R8

12-bay 3.5-inch rack server with one 22-core Xeon at 2.2 GHz, 192 GB DDR4 and PERC H730 controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size192GB
  • 22 cores at 2.2 GHz handle heavy workloads with Xeon E5-2699 v4
  • 192 GB DDR4 ECC registered memory supports large datasets and virtualisation
  • 12 large-form-factor 3.5-inch drive bays give high-capacity storage flexibility
  • PERC H730 SAS controller provides hardware RAID for data protection
  • iDRAC8 Enterprise enables remote management and firmware updates

Rack server with 12-bay 3.5" chassis

The Dell PowerEdge R730xd is a 2U rack server built around a single Xeon E5-2699 v4 processor running at 2.2GHz with 22 cores and 192GB of DDR4 ECC registered memory. It ships with a PERC H730 SAS RAID controller and an Intel network card providing two 10GbE and two 1GbE ports. Dual 1100W power supplies and iDRAC8 Enterprise remote management are installed. No drives are included.

Suits dense storage workloads; not for GPU compute

This configuration fits buyers who need up to 12 large-form-factor drives in a compact rack footprint for backup, archive or software-defined storage clusters. The single-socket layout and integrated graphics make it unsuitable for workloads that require GPU acceleration or the highest per-core frequencies. Buyers who need more than 192GB of memory today should note the board supports up to 768GB when fully populated.

12 x 3.5" drive bays with SAS/SATA support

The chassis provides twelve hot-plug 3.5-inch bays connected to the PERC H730 controller, accepting both SAS and SATA drives. This bay count is the defining constraint for capacity planning; each bay takes one drive and the controller manages RAID across the set.

Highlights

  • 22 cores at 2.2 GHz handle heavy workloads with Xeon E5-2699 v4
  • 192 GB DDR4 ECC registered memory supports large datasets and virtualisation
  • 12 large-form-factor 3.5-inch drive bays give high-capacity storage flexibility
  • PERC H730 SAS controller provides hardware RAID for data protection
  • iDRAC8 Enterprise enables remote management and firmware updates

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size192GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)6,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

Will the 12 3.5-inch bays accept the SATA drives I already own?

Yes, the chassis provides twelve 3.5-inch bays wired to the PERC H730 SAS controller which also supports SATA drives.

How can I confirm the Xeon E5-2699 v4 and 192 GB DDR4 are recognised after first boot?

Open the iDRAC8 Enterprise interface or enter the BIOS; both will show one 22-core processor at 2.2 GHz and 192 GB of DDR4 ECC registered memory.

Does the server ship with drive caddies and rails, or must I order them separately?

The unit includes two 1100 W power supplies, the PERC H730 card and the Intel 2×10 GbE + 2×1 GbE network card; drive caddies and rail kit are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.