DELL
DELL PowerEdge R740 8LFF 2x Xeon Gold 5120 384GB DDR4 No Drive
Rack server with eight 3.5-inch drive bays, dual Xeon Gold 5120 processors at 2.2GHz and 384GB DDR4 ECC memory
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Gold 5120 processors provide 14 cores each for heavy workloads
- 384GB DDR4 ECC registered memory supports large virtualisation environments
- PERC H730P RAID controller with 2GB cache protects data integrity
- Eight 3.5" drive bays allow high-capacity SATA storage expansion
- iDRAC9 Enterprise licence enables full remote server management
Dual-socket Xeon Gold server for dense storage
The Dell PowerEdge R740 chassis holds eight 3.5-inch drive bays and ships with two Xeon Gold 5120 processors running at 2.2 GHz, each with 14 cores and 19.25 MB cache. 384 GB of DDR4 ECC registered memory is installed across the 24 DIMM slots. A PERC H730P RAID controller manages the SATA backplane, and a 10 GbE 562T dual-port adapter handles network traffic.
Redundant 750 W supplies
Two R720 750 W power supplies share the load, so normal operation continues if one unit fails. The integrated iDRAC9 Enterprise licence gives full out-of-band control over power, firmware updates and console redirection without needing a local keyboard or monitor. Firmware is updated to the latest stable release before dispatch and the system passes a full burn-in test.
Rack-mount chassis with rail kit option and no
The 36 by 24 by 10 inch, 40-pound rack enclosure fits standard 19-inch cabinets and rails are available on request. Eight hot-plug 3.5-inch bays are cabled to the PERC H730P, but no drives are installed so you can populate them with the capacity and redundancy level your workload requires. Integrated graphics provide basic video output for initial setup.
Points forts
- Dual Xeon Gold 5120 processors provide 14 cores each for heavy workloads
- 384GB DDR4 ECC registered memory supports large virtualisation environments
- PERC H730P RAID controller with 2GB cache protects data integrity
- Eight 3.5" drive bays allow high-capacity SATA storage expansion
- iDRAC9 Enterprise licence enables full remote server management
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the Xeon Gold 5120 processors and what step is often missed?
The two 5120 CPUs are already seated in the sockets; the step people skip is confirming both processors appear in the BIOS before adding memory or drives.
What maintenance or replacement will the PERC H730P RAID controller need later?
The H730P controller uses a replaceable battery-backed write cache module that should be swapped when the iDRAC9 reports a degraded cache status.
Which limit appears first when the R740 runs sustained workloads with the 750 W supplies?
The dual 750 W power supplies set the thermal and current ceiling; sustained loads that draw near their combined rating will throttle the 2.2 GHz 5120 CPUs before memory or drive bandwidth saturates.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



