DELL
DELL PowerEdge R740 8LFF 2x Xeon Silver 4108 384GB DDR4 rack server
Eight 3.5-inch drive bays, dual Xeon Silver 4108 CPUs at 1.8 GHz, 384 GB DDR4 ECC memory and a PERC H730P RAID controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.8GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Silver 4108 processors provide 2 CPUs at 1.8GHz
- 384GB DDR4 ECC registered memory supports large workloads
- Eight 3.5-inch drive bays with PERC H730P RAID controller
- iDRAC9 Enterprise license enables remote server management
- Dual 750W power supplies and 10GbE 562T adapter included
PowerEdge R740 8LFF dual Xeon Silver 4108 server
The Dell PowerEdge R740 is a 2U rack server built for data-centre workloads that need high core counts and large memory capacity. It ships with two Intel Xeon Silver 4108 processors running at 1.8GHz and 384GB of DDR4 ECC registered memory. The 8LFF chassis accepts up to eight 3.5-inch SATA drives for local storage arrays. Remote management is handled by iDRAC9 with an Enterprise licence.
Sustained load behaviour with PERC H730P controller
Dual 750W power supplies feed the system so both CPUs and the full memory complement can run continuously without throttling. The PERC H730P RAID controller manages drive arrays with hardware acceleration, keeping latency steady during long backup or database jobs. Integrated graphics and a 10GbE 562T two-port adapter handle console and network traffic without adding heat. Firmware is updated to the latest stable release before dispatch.
Installation notes for rack deployment
The unit measures 36 by 24 by 10 inches and weighs 40 pounds, so two people or a lift are recommended when sliding it into a cabinet. Rail kits are available on request and are not included by default. Drives are not installed; the eight 3.5-inch bays accept SATA disks that must be sourced separately. Memory slots are fully populated at 384GB, leaving no room for further expansion without removing existing modules.
Points forts
- Dual Xeon Silver 4108 processors provide 2 CPUs at 1.8GHz
- 384GB DDR4 ECC registered memory supports large workloads
- Eight 3.5-inch drive bays with PERC H730P RAID controller
- iDRAC9 Enterprise license enables remote server management
- Dual 750W power supplies and 10GbE 562T adapter included
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.8GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How much power do the two 750 W supplies draw when the R740 runs continuously?
The server includes two 750 W power supplies; actual draw depends on workload and installed drives.
Which drive caddies and rails are required to populate the eight 3.5" bays?
The chassis accepts eight 3.5" SATA drives; Dell 3.5" caddies and a compatible rail kit are needed.
Will the PERC H730P controller work with older SATA drives I already own?
The PERC H730P supports SATA drives, so existing 3.5" SATA disks can be used in the eight bays.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



