DELL
DELL PowerEdge R740xd 12LFF 2x Xeon Bronze 3106 128GB DDR4 rack server
Rack server with 12 drive bays, dual 1.7 GHz Xeon Bronze 3106 processors, 128 GB DDR4 memory and PERC H730P RAID controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.7GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- 12 x 3.5" drive bays provide high-density local storage
- Dual Xeon Bronze 3106 processors run at 1.7 GHz for parallel workloads
- 128 GB DDR4 ECC memory supports large datasets
- PERC H730P RAID controller manages redundant arrays
- iDRAC9 Enterprise enables remote server administration
Purpose-built storage server
The Dell PowerEdge R740xd 12LFF chassis holds twelve 3.5-inch drive bays and ships with two Xeon Bronze 3106 processors running at 1.7 GHz plus 128 GB of DDR4 ECC registered memory. It targets organisations that need dense local capacity for backup, archive or software-defined storage workloads. No drives are installed so you populate the bays with the exact SATA disks your capacity plan requires.
Installation notes
The 2U rackmount unit measures 36 x 24 x 10 inches and weighs 40 pounds, so two-person lift or a server lift is standard practice. Slide rails are available on request and must be mounted before the chassis is seated. The PERC H730P RAID controller manages the twelve bays; cable routing is straightforward but verify the backplane matches your drive count before closing the lid. Firmware and BIOS are already updated to the latest stable release.
Pre-order checklist
Confirm your rack provides 2U of vertical space and sufficient depth for the 36-inch chassis plus cable management. Ensure the facility can supply two 1100 W power supplies on separate circuits. The integrated 10 GbE 562T dual-port adapter needs compatible switch ports and cabling. iDRAC9 Enterprise is licensed for remote management. Remember that drives are not included and maximum memory capacity reaches 3 TB if future expansion is planned.
Points forts
- 12 x 3.5" drive bays provide high-density local storage
- Dual Xeon Bronze 3106 processors run at 1.7 GHz for parallel workloads
- 128 GB DDR4 ECC memory supports large datasets
- PERC H730P RAID controller manages redundant arrays
- iDRAC9 Enterprise enables remote server administration
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.7GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 24,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I confirm the PERC H730P RAID controller detects all 12 drive bays after setup?
Open the controller BIOS at boot or log into iDRAC9 Enterprise; the dashboard lists every connected SATA drive and shows the RAID array status for each of the 12 bays.
The listing says no drives are installed — what else is included and what must I source separately?
The chassis ships with 2 Xeon Bronze 3106 CPUs, 128 GB DDR4 ECC registered memory, dual 1100 W power supplies, a 10 GbE 2-port 562T adapter, rails on request and updated firmware; you must add 3.5" SATA drives.
Should I choose the 12-bay 3.5" LFF chassis or a smaller bay count for a storage-heavy workload?
The 12-bay LFF chassis supports up to 12 large-form-factor SATA drives, giving maximum raw capacity per rack unit; select it when you need the highest drive count in a 2U server.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



