DELL
DELL PowerEdge T430 16SFF 2x Xeon E5-2680v4 192GB rack server
Rack server with 16 small-form-factor bays, dual 14-core Xeon CPUs at 2.4 GHz, 192 GB DDR4 and PERC H730 RAID
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size192GB
- Dual 14-core Xeon processors deliver high multi-threaded throughput
- 192 GB DDR4 ECC memory supports large virtualisation workloads
- 16 x 2.5-inch drive bays enable dense local storage
- PERC H730 SAS controller provides hardware RAID acceleration
- iDRAC8 Express gives remote out-of-band management access
Built for 16-bay density
The Dell PowerEdge T430 chassis holds up to sixteen 2.5-inch drives and ships with two Xeon E5-2680v4 processors running at 2.4 GHz. Fourteen cores per CPU and 192 GB of DDR4 ECC registered memory provide a solid base for virtualisation clusters or database workloads that benefit from high core counts and large memory capacity. A PERC H730 SAS controller manages RAID across SATA drives, and dual 1 100 W supplies deliver redundant power.
Suits memory-heavy tasks.
This configuration targets buyers who need abundant RAM and many drive bays in a 2U rack form factor. Integrated graphics and a 1 GbE two-port adapter limit its fit for GPU-accelerated compute or 10 GbE environments. Organisations requiring discrete GPU support or faster network interfaces should evaluate alternative platforms.
192 GB DDR4 with room to 384 GB
Installed memory sits at 192 GB across DDR4 ECC registered modules, while the platform maximum reaches 384 GB. That headroom lets you scale capacity without replacing existing DIMMs, making the memory ceiling the key figure when sizing this server for future growth.
Points forts
- Dual 14-core Xeon processors deliver high multi-threaded throughput
- 192 GB DDR4 ECC memory supports large virtualisation workloads
- 16 x 2.5-inch drive bays enable dense local storage
- PERC H730 SAS controller provides hardware RAID acceleration
- iDRAC8 Express gives remote out-of-band management access
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 192GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 384GB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Express License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the PERC H730 RAID controller and which step do people skip?
The PERC H730 is already installed in the chassis; the step most people miss is connecting the SAS cables from the controller to the 16-bay 2.5-inch backplane before powering on.
What maintenance will the 192GB DDR4 memory need later?
The DDR4 ECC registered modules are solid-state and require no scheduled replacement; only a failed DIMM would need swapping, and the system supports up to 384GB total capacity.
What limit appears first when both Xeon E5-2680v4 CPUs run at 2.4GHz under sustained load?
The dual 1100W power supplies set the practical ceiling; if combined draw exceeds their rated output the system will throttle or shut down before the 14-core processors hit thermal limits.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



