HPE
HPE BL460c G10 Blade Server 2x Xeon Gold 6148 48GB DDR4 2x 4TB SATA
Blade server with dual Xeon Gold 6148 CPUs, 48GB DDR4 RAM and two 4TB SATA drives
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed2.4 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size48GB
- Dual Xeon Gold 6148 processors deliver 20 cores at 2.4 GHz for heavy workloads
- 48 GB DDR4 ECC memory supports up to 128 GB capacity for growth
- Two 4 TB SATA drives provide 8 TB raw storage in 2.5 inch bays
- Smart Array P204i-b SR controller manages RAID for data protection
- Integrated iLO Advanced enables remote firmware updates and server monitoring
Blade server with dual Xeon Gold 6148 processors
The HPE BL460c G10 fits into a blade enclosure and delivers 20 cores at 2.4 GHz with 48 GB of DDR4 ECC registered memory. It is aimed at organisations that consolidate virtualised workloads on shared infrastructure.
Smart Array P204i-b SR controller manages the two
The onboard RAID controller provides hardware RAID for the installed 2.5-inch drives, enabling redundancy or capacity modes without consuming a PCIe slot. Integrated Lights-Out Advanced gives remote console, power control and firmware update access over the network.
Blade form factor limits expansion
Only two drive bays are available inside the server module, so storage growth depends on the enclosure's shared storage or external arrays. The FlexFabric 20 Gb 2-port adapter connects through the enclosure interconnects, so network topology is defined by the chassis configuration.
Points forts
- Dual Xeon Gold 6148 processors deliver 20 cores at 2.4 GHz for heavy workloads
- 48 GB DDR4 ECC memory supports up to 128 GB capacity for growth
- Two 4 TB SATA drives provide 8 TB raw storage in 2.5 inch bays
- Smart Array P204i-b SR controller manages RAID for data protection
- Integrated iLO Advanced enables remote firmware updates and server monitoring
Caractéristiques
| Brand | HP |
|---|---|
| Series | Proliant BL |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 48GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 128GB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | HP Smart Array P204i-b SR Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | Integrated Lights-Out (iLO) Advanced |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions sur cet article
What drive-replacement steps apply to the two 2.5-inch 4 TB SATA drives in the BL460c G10?
The blade holds two 2.5-inch SATA bays; each 4 TB drive is hot-pluggable and connects to the Smart Array P204i-b SR controller, so a failed unit can be swapped without powering down.
Which resource hits its ceiling first when both Xeon Gold 6148 CPUs run at 2.4 GHz under constant load?
The installed 48 GB of DDR4 ECC registered memory is the first limit; the board supports up to 128 GB, so sustained workloads will exhaust capacity before the dual 10-core processors saturate.
How loud and hot does the blade get when the dual Xeon Gold 6148 processors and two 4 TB SATA drives operate continuously?
The dual 10-core Xeon Gold 6148 CPUs and spinning 2.5-inch SATA drives generate significant heat; the enclosure fans ramp up to maintain thermal limits, producing noticeable airflow noise in a rack row.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



