HPE
HPE DL360 Gen10 8SFF 2x Xeon Platinum 8160 512GB DDR4 rack server
Rack server with dual 24-core Xeon Platinum 8160 processors at 2.1GHz, 512GB DDR4 memory, Smart Array P408 SAS controller, and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon Platinum 8160 CPUs deliver 48 cores total for heavy compute
- 512 GB DDR4 ECC memory supports large in-memory workloads
- Smart Array P408 controller enables flexible SAS storage arrays
- iLO Advanced remote management provides full out-of-band control
- 8 SFF drive bays ready for 2.5-inch SAS drives
Dual Xeon Platinum 8160 1U rack server
The HPE DL360 Gen10 8SFF is a 1U rack server equipped with two Intel Xeon Platinum 8160 processors running at 2.1GHz. It delivers 48 cores and 512GB of DDR4 ECC registered memory, designed for compute-intensive workloads in data centre environments. The chassis supports up to eight 2.5-inch drive bays.
High core count and memory capacity
This server suits organisations running dense virtualisation, database or high-performance computing clusters that benefit from 48 threads and half a terabyte of RAM. Buyers who need GPU acceleration or more than eight internal drive bays should consider alternative platforms. The configuration ships without storage drives.
Smart Array P408 SAS controller
Storage connectivity is handled by an HPE Smart Array P408 SAS controller with 2GB flash-backed write cache. The controller manages SAS hard drives and SSDs installed in the eight 2.5-inch bays. Integrated 10GbE and 1GbE network adapters provide high-throughput connectivity.
Points forts
- Dual Xeon Platinum 8160 CPUs deliver 48 cores total for heavy compute
- 512 GB DDR4 ECC memory supports large in-memory workloads
- Smart Array P408 controller enables flexible SAS storage arrays
- iLO Advanced remote management provides full out-of-band control
- 8 SFF drive bays ready for 2.5-inch SAS drives
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 4,80 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Will the P408 SAS controller recognise the 2.5" SAS drives I already use in my Gen9 rack?
The P408 controller uses the same SAS interface as earlier generations, so existing 2.5" SAS drives will be detected and can be configured in RAID without firmware changes.
How can I confirm the dual 10 GbE ports on the installed Intel I350/X540 card are active after first boot?
Open iLO, navigate to the Network section and verify both 10 GbE links show "Up" with negotiated speed; the OS will then list two additional 10 GbE adapters.
Does the chassis ship with drive caddies for the eight 2.5" bays or must I order them separately?
The 8 SFF chassis includes eight drive caddies; only the drives themselves need to be purchased if you want storage installed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



