HPE
HPE DL380 Gen9 4LFF 2x Xeon E5-2620 v3 512GB RAM No Drive rack server
Rack server with dual Xeon processors, 512 GB DDR4 memory and four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon E5-2620 v3 processors provide 2.4GHz performance for demanding workloads
- 512GB DDR4 ECC memory supports large datasets and virtualization
- HPE Smart Array P440 SAS controller enables flexible RAID configurations
- Four 3.5-inch drive bays ready for SATA storage expansion
- HPE iLO Advanced remote management simplifies server administration
HPE DL380 Gen9 4LFF rack server
The HPE DL380 Gen9 4LFF is a 2U rack-mount server system built for data-centre workloads. It ships with two Intel Xeon E5-2620 v3 processors running at 2.4GHz and 512GB of DDR4 ECC registered memory. A Smart Array P440 SAS controller manages up to four 3.5-inch drive bays, and dual 500W flex-slot power supplies provide redundancy.
Suits virtualisation hosts needing large memory
This configuration fits environments that run many virtual machines or in-memory databases and can populate storage separately. It is not for buyers who want drives included, who need GPU acceleration, or who require 10GbE or faster networking from the factory. The integrated graphics and 1GbE 332T adapter limit display and network throughput.
512GB DDR4 installed memory decides fit
The installed 512GB of DDR4 ECC registered RAM sets the immediate working set size and determines whether the server can handle the intended consolidation ratio. Memory can scale to 3TB across the 24 DIMM slots, but the starting capacity is the key figure for initial deployment planning.
Points forts
- Dual Xeon E5-2620 v3 processors provide 2.4GHz performance for demanding workloads
- 512GB DDR4 ECC memory supports large datasets and virtualization
- HPE Smart Array P440 SAS controller enables flexible RAID configurations
- Four 3.5-inch drive bays ready for SATA storage expansion
- HPE iLO Advanced remote management simplifies server administration
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack depth does the 36 x 24 x 10 inch chassis require?
The server measures 36 inches deep, so the rack must provide at least that much usable depth plus cable clearance at the rear.
Which rail kit fits the DL380 Gen9 4LFF chassis?
HPE offers a specific rail kit for this chassis; it is available on request and must be mounted to square-hole or round-hole rack posts before sliding the unit in.
When should the 500 W Flex Slot power supplies be replaced?
Replace a supply if iLO reports a fault LED, if the unit runs on a single supply for an extended period, or after the rated service life stated in the HPE maintenance guide.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



