HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
1 749,99 $US
0.02223226BTC
En stock
HPE
HPE DL380 Gen9 4LFF rack server 2x Xeon E5-2630 v3 384GB DDR4 no drives
A 4-bay 3.5-inch rack server with dual 2.4 GHz Xeon processors and 384 GB DDR4 memory, ready for custom storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2630 v3 processors run at 2.4GHz for multi-threaded workloads
- 384GB DDR4 ECC memory supports large virtualisation clusters
- HPE Smart Array P440 SAS controller manages up to four 3.5" drives
- Integrated iLO Advanced enables remote firmware updates and monitoring
- Dual 500W Flex Slot power supplies provide redundancy in a 2U chassis
HPE DL380 Gen9 4LFF dual Xeon server
The HPE DL380 Gen9 4LFF is a rack-mounted server system equipped with two Intel Xeon E5-2630 v3 processors running at 2.4GHz. It comes populated with 384GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller. The 4LFF chassis supports up to four 3.5-inch SATA drives, which are not included in this configuration. Remote management is handled by HPE iLO Advanced.
Suitable for memory-intensive workloads
This server suits organisations that need a high memory capacity within a dual-processor rack form factor. The 384GB DDR4 installation supports large in-memory databases, virtualisation hosts or compute clusters. Buyers who require internal storage out of the box must add drives separately. The four-bay 3.5-inch limit means it is not for deployments needing many local disks or 2.5-inch form-factor bays.
384GB DDR4 installed memory capacity
The single specification that determines fit is the 384GB of installed DDR4 memory across two processors. This capacity is fixed in the listing and cannot be inferred for other configurations. The system supports a maximum of 3TB, but only the 384GB is present. Verify that this memory amount matches the workload before purchasing.
Points forts
- Dual Xeon E5-2630 v3 processors run at 2.4GHz for multi-threaded workloads
- 384GB DDR4 ECC memory supports large virtualisation clusters
- HPE Smart Array P440 SAS controller manages up to four 3.5" drives
- Integrated iLO Advanced enables remote firmware updates and monitoring
- Dual 500W Flex Slot power supplies provide redundancy in a 2U chassis
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the HPE Smart Array P440 SAS controller and what step is often missed?
Seat the P440 in a PCIe slot, connect the SAS cables to the 3.5-inch drive backplane, then run the Smart Storage Administrator to create logical volumes before the OS sees any storage.
Which components will need replacement first during long-term operation?
The two 500W Flex Slot power supplies and the system fans are the primary field-replaceable units; DDR4 ECC DIMMs may require replacement only if a corrected-error threshold is exceeded.
What thermal or power limit appears first when both Xeon E5-2630 v3 CPUs run at 2.4GHz continuously?
The 500W power-supply rating per module sets the ceiling; sustained full-load CPU activity can draw enough power to trigger throttling before the cooling capacity is exceeded.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
708,99 $US
0.00900717BTC
En stock
