HPE
HPE ProLiant DL360 Gen10 8SFF 2x Xeon Silver 4114 512GB DDR4 rack server
Dual-socket 2.2 GHz Xeon Silver 4114 rack server with 512 GB DDR4 ECC memory, HPE Smart Array P408 controller and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon Silver 4114 CPUs deliver 10 cores each at 2.2GHz
- 512GB DDR4 ECC registered memory supports demanding virtualization workloads
- HPE Smart Array P408 SAS controller manages up to 8 SFF drive bays
- Integrated Intel I350/X540 network card provides 2x 10GbE and 2x 1GbE ports
- Dual 500W Flex Slot power supplies with iLO Advanced remote management
Purpose-built compute density
The HPE ProLiant DL360 Gen10 packs two Xeon Silver 4114 processors at 2.2GHz and 512GB DDR4 ECC registered memory into a 1U rack chassis with eight 2.5-inch drive bays. A Smart Array P408 SAS controller and dual 10GbE plus dual 1GbE ports are factory-installed for high-throughput workloads.
Virtualisation hosts not storage appliances
This configuration suits dense virtualisation, container clusters or database nodes that need abundant CPU threads and memory capacity but bring their own drives. Buyers who want pre-populated storage arrays or GPU-accelerated compute should look at a different build.
Slide-in deployment with firmware current
The server ships with BIOS and firmware updated, burn-in tested and rails available on request. Installation typically means racking the unit, inserting drives, cabling power and network, then licensing iLO Advanced for remote management.
Points forts
- Dual Xeon Silver 4114 CPUs deliver 10 cores each at 2.2GHz
- 512GB DDR4 ECC registered memory supports demanding virtualization workloads
- HPE Smart Array P408 SAS controller manages up to 8 SFF drive bays
- Integrated Intel I350/X540 network card provides 2x 10GbE and 2x 1GbE ports
- Dual 500W Flex Slot power supplies with iLO Advanced remote management
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 20,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What power connections must already be present in my rack for the two 500W flex-slot supplies?
Each supply uses a standard IEC C14 inlet, so two PDU outlets with matching C13 cords are required.
Will the Smart Array P408 controller recognise the SATA drives I already own?
Yes, the P408 supports SATA HDDs and SSDs alongside SAS devices on the same backplane.
How do I confirm the 512GB DDR4 ECC memory is detected and healthy after first boot?
Open the iLO web interface, navigate to the Memory tab and verify all DIMM slots show "OK" with the correct 512GB total.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



