HPE
HPE ProLiant DL360 Gen9 8SFF 2x Xeon E5-2640 v3 512GB DDR4 rack server
Rack server with two 2.6 GHz Xeon processors, 512 GB DDR4 memory, P440 SAS controller and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon E5-2640 v3 CPUs provide 2.6GHz multi-threaded performance
- 512GB DDR4 ECC memory supports large virtualisation workloads
- HPE Smart Array P440 controller enables flexible SAS or SATA storage
- HPE iLO Advanced gives full remote server management
- 8SFF chassis fits up to eight 2.5in drives in 1U space
Dual-processor 1U rack server
The HPE ProLiant DL360 Gen9 packs two Intel Xeon E5-2640 v3 CPUs at 2.6GHz and 512GB of DDR4 ECC memory into a 1U chassis. Eight 2.5-inch drive bays connect to an HPE Smart Array P440 SAS controller with SATA support. Dual 500W Flex Slot power supplies and integrated iLO remote management complete the platform.
Suits dense virtualisation; not for local capacity
This configuration targets environments that need high core counts and large memory footprints in minimal rack space — virtualisation hosts, database nodes or HPC clusters. Buyers who want installed storage, GPU acceleration or more than two sockets should look at other form factors. The eight-bay chassis limits internal capacity compared with 2U or 4U alternatives.
512GB DDR4 ECC with 768GB ceiling
The system ships with 512GB of registered DDR4 ECC installed across the available DIMM slots. Maximum supported capacity is 768GB, so further expansion is possible but constrained by the two-processor memory architecture. Matching this ceiling determines whether the server can absorb future workload growth without a platform change.
Points forts
- Dual Xeon E5-2640 v3 CPUs provide 2.6GHz multi-threaded performance
- 512GB DDR4 ECC memory supports large virtualisation workloads
- HPE Smart Array P440 controller enables flexible SAS or SATA storage
- HPE iLO Advanced gives full remote server management
- 8SFF chassis fits up to eight 2.5in drives in 1U space
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the P440 SAS controller so the eight 2.5" bays are recognised?
Seat the P440 in the dedicated PCIe slot, connect the two mini-SAS cables to the backplane, then run the Smart Storage Administrator from the iLO interface to create the logical drives before the OS sees them.
When will the 512GB of DDR4 ECC registered memory need to be expanded or replaced?
The system supports a maximum of 768GB across 24 slots; add modules in matched pairs per processor when applications exceed the current capacity or when a DIMM fails its POST health check.
What thermal limit appears first when both Xeon E5-2640 v3 CPUs run at 2.6GHz continuously?
The dual 500W Flex Slot supplies share the load; if inlet temperature rises above 35°C the fans ramp to maximum and the iLO will throttle the processors to protect the 40kg chassis.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



