We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE ProLiant DL360 Gen9 8SFF 2x Xeon E5-2640 v3 512GB DDR4 rack server

SKU CH-1B5N-7TWTD

Rack server with two 2.6 GHz Xeon processors, 512 GB DDR4 memory, P440 SAS controller and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size512GB
  • Dual Xeon E5-2640 v3 CPUs provide 2.6GHz multi-threaded performance
  • 512GB DDR4 ECC memory supports large virtualisation workloads
  • HPE Smart Array P440 controller enables flexible SAS or SATA storage
  • HPE iLO Advanced gives full remote server management
  • 8SFF chassis fits up to eight 2.5in drives in 1U space

Dual-processor 1U rack server

The HPE ProLiant DL360 Gen9 packs two Intel Xeon E5-2640 v3 CPUs at 2.6GHz and 512GB of DDR4 ECC memory into a 1U chassis. Eight 2.5-inch drive bays connect to an HPE Smart Array P440 SAS controller with SATA support. Dual 500W Flex Slot power supplies and integrated iLO remote management complete the platform.

Suits dense virtualisation; not for local capacity

This configuration targets environments that need high core counts and large memory footprints in minimal rack space — virtualisation hosts, database nodes or HPC clusters. Buyers who want installed storage, GPU acceleration or more than two sockets should look at other form factors. The eight-bay chassis limits internal capacity compared with 2U or 4U alternatives.

512GB DDR4 ECC with 768GB ceiling

The system ships with 512GB of registered DDR4 ECC installed across the available DIMM slots. Maximum supported capacity is 768GB, so further expansion is possible but constrained by the two-processor memory architecture. Matching this ceiling determines whether the server can absorb future workload growth without a platform change.

Highlights

  • Dual Xeon E5-2640 v3 CPUs provide 2.6GHz multi-threaded performance
  • 512GB DDR4 ECC memory supports large virtualisation workloads
  • HPE Smart Array P440 controller enables flexible SAS or SATA storage
  • HPE iLO Advanced gives full remote server management
  • 8SFF chassis fits up to eight 2.5in drives in 1U space

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)7,68
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How do I install the P440 SAS controller so the eight 2.5" bays are recognised?

Seat the P440 in the dedicated PCIe slot, connect the two mini-SAS cables to the backplane, then run the Smart Storage Administrator from the iLO interface to create the logical drives before the OS sees them.

When will the 512GB of DDR4 ECC registered memory need to be expanded or replaced?

The system supports a maximum of 768GB across 24 slots; add modules in matched pairs per processor when applications exceed the current capacity or when a DIMM fails its POST health check.

What thermal limit appears first when both Xeon E5-2640 v3 CPUs run at 2.6GHz continuously?

The dual 500W Flex Slot supplies share the load; if inlet temperature rises above 35°C the fans ramp to maximum and the iLO will throttle the processors to protect the 40kg chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.